Bearing Insert Type | Radial Ball |
Bore Dia. | 1 7/16 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Stainless Steel |
Bearing Insert Material | Stainless Steel |
Bolt Hole Center-to-Center | 127 mm |
Mounting Surface to Shaft Center | 47.6 mm |
Series | Corrosion Resistant with USDA-H1 Grease |
Number of Bolts | 2 |
Bolt Size | M14 |
Finish | Chrome |
Bearing Lubrication | Caltex FM EP or Equivalent USDA-H1 Grease |
Overall Height | 3.7 in |
Dimension H1 | 19 mm |
Item | Pillow Block Bearing |
Housing Material | Stainless Steel |
Overall Width | 1.889 in |
Static Load Capacity | 3,510 lb |
Dimension J | 127 mm |
Dimension L | 167 mm |
Temp. Range | -4 Degrees to 248 Degrees F |
Dimension A | 48 mm |
Dimension N | 17 mm |
Dimension H2 | 94 mm |
Dimension H | 47.6 mm |
Dynamic Load Capacity | 4,520 lb |
Overall Length | 6.574 in |
Locking Type | Set Screw |
Dimension S | 17.5 mm |
Standards | FDA |
Lubricant Material | FDA/USDA-H1 Solid Grease |
Dynamic Radial Load Capacity | 4,519 lbf |
Seal Material | Silicone |
Housing Material Grade | Type 304 |
Base Height | 0.748 in |
Housing Material Finish | Chrome Plated |
Mount Type | Bolt-Through |
System of Measurement | Inch |
Base Width | 1.889 in |
Static Radial Load Capacity | 3,507 lbf |
Mounting Bolt Size | M14 |
Features | Normal Duty |
Seal Type | Contact |
Maximum Speed | 3,700 RPM |
Minimum Temperature | -4 Degrees F |
Mount Hole Center-to-Center Length | 5 in |
Resistance Properties | Corrosion Resistant |
Maximum Temperature | 250 Degrees F |
Bearing Material Grade | 440C |
Inner Ring Width | 1.689 in |
Number of Mount Holes | 2 |
Mount Hole Size | 0.669 in x 0.827 in |
Center Height | 1 55/64 in |
Bore Diameter | 1 7/16 in |
Closure | Open |
Bore Type | Cylindrical |
Country of Origin (subject to change) | Multiple |
Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-7/16" Bore, NTN, Mfr# SUCP207-23
$346,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.748 in, Base Width 1.889 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 7/16 in, Bore Type Cylindrical, Center Height 1 55/64 in, Closure Open, Housing Material Stainless Steel, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 3,700 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 5 in, Mount Type Bolt-Through, Number of Mount Holes 2
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.