| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 7/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 5 3/8 in |
| Mounting Surface to Shaft Center | 2 1/8 in |
| Series | Medium Duty |
| Number of Bolts | 2 |
| Temp. Range | -20 Degrees to 250 Degrees F |
| Locking Type | Set Screw |
| Dimension N | 9/16 in |
| Dimension B | 1 15/16 in |
| Overall Length | 7.063 in |
| Dimension S | 3/4 in |
| Dimension H1 | 29/32 in |
| Overall Height | 4.126 in |
| Housing Material | Cast Iron |
| Dimension H2 | 4 1/8 in |
| Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
| Static Load Capacity | 4,000 lb |
| Bolt Size | 1/2 in |
| Overall Width | 1.875 in |
| Dimension A | 1 7/8 in |
| Item | Pillow Block Bearing |
| Finish | Painted |
| Dimension J | 5 3/8 in |
| Dimension H | 2 1/8 in |
| Dimension L | 7 1/16 in |
| Dimension D | 1 7/16 in |
| Dynamic Load Capacity | 6,550 lb |
| Base Height | 0.905 in |
| Mount Hole Size | 0.563 in x 1.031 in |
| Bearing Material Grade | 52100 |
| Features | Light Duty |
| Bore Diameter | 1 7/16 in |
| Maximum Speed | 3,550 RPM |
| Seal Material | Nitrile Rubber |
| Maximum Temperature | 250 Degrees F |
| Mount Type | Bolt-Through |
| Center Height | 2 1/8 in |
| Base Width | 1.874 in |
| Closure | Open |
| Mount Hole Center-to-Center Length | 5 23/64 in |
| Mounting Bolt Size | 1/2 in |
| Static Radial Load Capacity | 4,002 lbf |
| Bore Type | Cylindrical |
| Seal Type | Contact |
| Number of Mount Holes | 2 |
| Inner Ring Width | 1.937 in |
| Dynamic Radial Load Capacity | 6,542 lbf |
| Housing Material Finish | Black Oxide |
| Minimum Temperature | -40 Degrees F |
| System of Measurement | Inch |
| Lubricant Material | NLGI #3 Equivalent |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-7/16" Bore, NTN, Mfr# UCPX-1.7/16M
$126.09
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.905 in, Base Width 1.874 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 7/16 in, Bore Type Cylindrical, Center Height 2 1/8 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 3,550 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 5 23/64 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$126.09
You must be logged in to post a review.
Reviews
There are no reviews yet.