| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Pressed Steel |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 3 5/8 in |
| Mounting Surface to Shaft Center | 1 1/2 in |
| Series | SRP |
| Number of Bolts | 2 |
| Bolt Size | 3/8 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Dimension D | 1 5/16 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Finish | black oxide |
| Dimension C | 3 5/8 in |
| Dimension A | 1 1/2 in |
| Dimension E | 2 3/64 in |
| Housing Material | Steel |
| Dynamic Load Capacity | 200 lb |
| Dimension J | 1 3/8 in |
| Item | Pillow Block Bearing |
| Overall Length | 4.75 in |
| Dimension H | 2 13/16 in |
| Locking Type | Set Screw |
| Static Load Capacity | 120 lb |
| Overall Width | 1.437 in |
| Dimension B | 4 3/4 in |
| Dimension M | 1 7/16 in |
| Dimension G | 11/64 in |
| Overall Height | 2.812 in |
| Mount Hole Center-to-Center Length | 3 5/8 in |
| Maximum Temperature | 220 Degrees F |
| Mount Hole Size | 7/16 in |
| Expansion Type | Fixed |
| Closure | Double Sealed |
| Dynamic Radial Load Capacity | 200 lbf |
| Bore Type | Cylindrical |
| Mounting Bolt Size | 3/8 in |
| Lubricant Material | NGLI #2 Equivalent |
| Seal Material | Felt |
| Static Radial Load Capacity | 120 lbf |
| Bore Diameter | 1 in |
| Center Height | 1.5 in |
| Number of Mount Holes | 2 |
| Bearing Material Grade | 52100 |
| Maximum Speed | 6,350 RPM |
| Seal Type | Contact |
| Housing Material Finish | Black Oxide |
| System of Measurement | Inch |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Mount Type | Bolt-Through |
| Minimum Temperature | -20 Degrees F |
| Self Lubricating Bearing | No |
| Base Height | 0.171 in |
| Base Width | 1.312 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1" Bore, SEALMASTER, Mfr# SRP-16
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.171 in, Base Width 1.312 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 in, Bore Type Cylindrical, Center Height 1.5 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Steel, Lubricant Material NGLI #2 Equivalent, Maximum Speed 6,350 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 3 5/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$134.99
You must be logged in to post a review.
Reviews
There are no reviews yet.