| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Stainless Steel |
| Bearing Insert Material | Stainless Steel |
| Bolt Hole Center-to-Center | 105 mm |
| Mounting Surface to Shaft Center | 36.5 mm |
| Series | SUCP |
| Number of Bolts | 2 |
| Bolt Size | M12 |
| Locking Type | Set Screw |
| Bearing Lubrication | Caltex FM EP or Equivalent USDA-H1 Grease |
| Overall Width | 1.862 in |
| Temp. Range | -4 Degrees to 230 Degrees F |
| Dynamic Load Capacity | 2,475 lb |
| Overall Height | 2.755 in |
| Static Load Capacity | 1,800 lb |
| Includes | Stainless Steel End Cap |
| Overall Length | 5.511 in |
| Housing Material | Stainless Steel |
| Item | Pillow Block Bearing |
| Finish | Chrome |
| Standards | FDA |
| Mounting Bolt Size | M12 |
| Housing Material Grade | Type 304 |
| Inner Ring Width | 1.342 in |
| Seal Material | Silicone |
| Mount Hole Center-to-Center Length | 4 1/8 in |
| Dynamic Radial Load Capacity | 2,473 lbf |
| Maximum Speed | 5,100 RPM |
| Mount Hole Size | 0.512 in x 0.748 in |
| Minimum Temperature | -4 Degrees F |
| Features | Light Duty |
| Bore Diameter | 1 in |
| Center Height | 1 27/64 in |
| Base Width | 1.496 in |
| Bearing Material Grade | 440C |
| Housing Material Finish | Chrome Plated |
| System of Measurement | Inch |
| Number of Mount Holes | 2 |
| Resistance Properties | Corrosion Resistant |
| Maximum Temperature | 250 Degrees F |
| Base Height | 0.629 in |
| Closure | Double Sealed |
| Static Radial Load Capacity | 1,798 lbf |
| Seal Type | Contact |
| Lubricant Material | FDA/USDA-H1 Solid Grease |
| Mount Type | Bolt-Through |
| Bore Type | Cylindrical |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1" Bore, NTN, Mfr# SUCP205-16CC
$200,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.629 in, Base Width 1.496 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 in, Bore Type Cylindrical, Center Height 1 27/64 in, Closure Double Sealed, Housing Material Stainless Steel, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 5,100 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 4 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$200.99
You must be logged in to post a review.
Reviews
There are no reviews yet.