| Bearing Insert Type | Radial Ball |
| Bore Dia. | 11/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 3 3/4 in |
| Mounting Surface to Shaft Center | 1 3/16 in |
| Series | NP |
| Number of Bolts | 2 |
| Locking Type | Set Screw |
| Item | Pillow Block Bearing |
| Finish | black oxide |
| Dimension A | 1 3/16 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Housing Material | Cast Iron |
| Dimension J | 1 7/32 in |
| Overall Width | 1.5 in |
| Static Load Capacity | 1,444 lb |
| Overall Height | 2.437 in |
| Dimension E | 1 9/32 in |
| Overall Length | 5 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Dimension L | 1 3/16 in |
| Bolt Size | 1/2 in |
| Dimension H | 2 7/16 in |
| Dimension B | 5 in |
| Dimension C | 3-3/8 in to 4-1/8 in |
| Dimension G | 1/2 in |
| Dimension F | 7/16 in |
| Dimension D | 1 1/2 in |
| Dynamic Load Capacity | 2,611 lb |
| Closure | Double Sealed |
| Bearing Material Grade | 52100 |
| Seal Type | Contact |
| Maximum Misalignment Angle | 2 Degrees |
| Maximum Speed | 7,300 RPM |
| Bore Diameter | 11/16 in |
| System of Measurement | Inch |
| Seal Material | Felt |
| Center Height | 1 3/16 in |
| Mount Type | Bolt-Through |
| Lubricant Material | NGLI #2 Equivalent |
| Base Width | 1.5 in |
| Bore Type | Cylindrical |
| Base Height | 0.5 in |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Maximum Temperature | 220 Degrees F |
| Static Radial Load Capacity | 1,444 lbf |
| Housing Material Finish | Black Oxide |
| Number of Mount Holes | 2 |
| Mounting Bolt Size | 3/8 in |
| Mount Hole Center-to-Center Length | 4 1/8 in |
| Self Lubricating Bearing | Yes |
| Minimum Temperature | -20 Degrees F |
| Dynamic Radial Load Capacity | 2,611 lbf |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 11/16" Bore, SEALMASTER, Mfr# NP-11
$203,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.5 in, Base Width 1.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 11/16 in, Bore Type Cylindrical, Center Height 1 3/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Speed 7,300 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 4 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$203.99
You must be logged in to post a review.
Reviews
There are no reviews yet.