| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 1/4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 3/4 in |
| Mounting Surface to Shaft Center | 1 11/16 in |
| Series | NP |
| Number of Bolts | 2 |
| Item | Pillow Block Bearing |
| Dimension B | 6 1/2 in |
| Dimension A | 1 11/16 in |
| Static Load Capacity | 2,567 lb |
| Dimension C | 4-7/16 in to 5-1/16 in |
| Overall Length | 6.5 in |
| Dynamic Load Capacity | 4,381 lb |
| Dimension F | 9/16 in |
| Dimension J | 1 1/2 in |
| Bolt Size | 1/2 in |
| Dimension H | 3 3/8 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Finish | black oxide |
| Overall Height | 3.375 in |
| Housing Material | Cast Iron |
| Dimension L | 1 19/32 in |
| Dimension E | 13/16 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Dimension G | 9/16 in |
| Overall Width | 1.875 in |
| Dimension D | 1 7/8 in |
| Locking Type | Set Screw |
| Mount Type | Bolt-Through |
| Seal Type | Contact |
| Dynamic Radial Load Capacity | 4,381 lbf |
| Number of Mount Holes | 2 |
| Mounting Bolt Size | 1/2 in |
| Base Height | 0.563 in |
| Bore Diameter | 1 1/4 in |
| Center Height | 1 11/16 in |
| Static Radial Load Capacity | 2,567 lbf |
| Minimum Temperature | -20 Degrees F |
| Closure | Double Sealed |
| Lubricant Material | NGLI #2 Equivalent |
| Self Lubricating Bearing | Yes |
| Maximum Temperature | 220 Degrees F |
| Seal Material | Felt |
| Housing Material Finish | Black Oxide |
| System of Measurement | Inch |
| Mount Hole Center-to-Center Length | 5 3/64 in |
| Maximum Speed | 5,450 RPM |
| Bearing Material Grade | 52100 |
| Maximum Misalignment Angle | 2 Degrees |
| Base Width | 1.875 in |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Bore Type | Cylindrical |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-1/4" Bore, SEALMASTER, Mfr# NP-20R
-$6.87 / ea
with subscription
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.563 in, Base Width 1.875 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/4 in, Bore Type Cylindrical, Center Height 1 11/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Speed 5,450 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 5 3/64 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$228.99
You must be logged in to post a review.
Reviews
There are no reviews yet.