| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 1/4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 5/8 in |
| Mounting Surface to Shaft Center | 1 9/16 in |
| Series | SAK |
| Number of Bolts | 2 |
| Static Load Capacity | 2,500 lb |
| Dynamic Load Capacity | 4,900 lb |
| Dimension L | 6 3/16 in |
| Dimension F | 1 70/83 in |
| Dimension J | 4 5/8 in |
| Bolt Size | 1/2 in |
| Dimension N | 9/16 in |
| Item | Pillow Block Bearing |
| Dimension H | 1 9/16 in |
| Housing Material | Cast Iron |
| Finish | Powder Coated |
| Dimension H2 | 3 5/32 in |
| Temp. Range | -65 Degrees to 200 Degrees F |
| Dimension H1 | 17/32 in |
| Overall Width | 1.765 in |
| Dimension A | 1 9/16 in |
| Overall Height | 3.625 in |
| Locking Type | Set Screw |
| Bearing Lubrication | Mobil Polyrex EM or NLGI #2 Equivalent |
| Overall Length | 6.562 in |
| Mount Type | Bolt-Through |
| Lubricant Material | NGLI #2 Equivalent |
| Number of Mount Holes | 2 |
| Housing Material Finish | Powder Coated |
| Maximum Temperature | 200 Degrees F |
| Closure | Double Sealed |
| Seal Type | Contact |
| Base Height | 0.657 in |
| Bore Type | Cylindrical |
| System of Measurement | Inch |
| Mount Hole Size | 0.969 in x 0.563 in |
| Inner Ring Width | 1.437 in |
| Minimum Temperature | -65 Degrees F |
| Static Radial Load Capacity | 3,440 lbf |
| Center Height | 1 13/16 in |
| Features | Base-To-Center Line Height Indicator, Easy Access to Mounting Bolts, Set Screw Access, Solid, Flat Feet |
| Bearing Material Grade | 52100 |
| Dynamic Radial Load Capacity | 6,400 lbf |
| Mount Hole Center-to-Center Length | 5 1/8 in |
| Mounting Bolt Size | 1/2 in |
| Application | Industrial |
| Resistance Properties | Corrosion Resistant |
| Bore Diameter | 1 1/4 in |
| Load Direction | Radial, Thrust |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-1/4" Bore, TIMKEN, Mfr# SAK 1 1/4S
$85.93
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.657 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/4 in, Bore Type Cylindrical, Center Height 1 13/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 200 Degrees F, Minimum Temperature -65 Degrees F, Mount Hole Center-to-Center Length 5 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 3.625 in, Overall Length 6.562 in
9999 in stock
Must order in multiples of 1
Subtotal:
$85.93
You must be logged in to post a review.
Reviews
There are no reviews yet.