Bearing Insert Type | Radial Ball |
Bore Dia. | 1 15/16 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Cast Iron |
Bearing Insert Material | Alloy Steel |
Bolt Hole Center-to-Center | 6 1/4 in |
Mounting Surface to Shaft Center | 2 1/4 in |
Series | Standard Duty |
Number of Bolts | 2 |
Dimension A | 2 3/8 in |
Bolt Size | 5/8 in |
Dimension J | 6 1/4 in |
Temp. Range | -20 Degrees to 250 Degrees F |
Item | Pillow Block Bearing |
Dimension H1 | 13/16 in |
Housing Material | Cast Iron |
Dynamic Load Capacity | 7,900 lb |
Locking Type | Set Screw |
Dimension H | 2 1/4 in |
Finish | Painted |
Dimension E | 1 17/32 in |
Dimension H2 | 4 1/2 in |
Overall Length | 8.11 in |
Dimension S | 3/4 in |
Dimension B | 2 1/32 in |
Overall Height | 4.488 in |
Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
Dimension N | 25/32 in |
Overall Width | 2.375 in |
Static Load Capacity | 5,220 lb |
Dimension L | 8 1/8 in |
Bore Type | Cylindrical |
Base Height | 0.826 in |
Mounting Bolt Size | 5/8 in |
Static Radial Load Capacity | 5,216 lbf |
Features | Light Duty |
Dynamic Radial Load Capacity | 7,868 lbf |
Minimum Temperature | -40 Degrees F |
Bearing Material Grade | 52100 |
Mount Hole Center-to-Center Length | 6 1/4 in |
Seal Type | Contact |
Base Width | 2.362 in |
Maximum Temperature | 250 Degrees F |
Lubricant Material | NLGI #3 Equivalent |
Seal Material | Nitrile Rubber |
Bore Diameter | 1 15/16 in |
Closure | Open |
Number of Mount Holes | 2 |
Inner Ring Width | 2.031 in |
System of Measurement | Inch |
Mount Hole Size | 0.787 in x 0.906 in |
Maximum Speed | 3,100 RPM |
Housing Material Finish | Painted |
Center Height | 2 1/4 in |
Mount Type | Bolt-Through |
Country of Origin (subject to change) | Japan |
Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-15/16" Bore, NTN, Mfr# UCP210-115D1
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.826 in, Base Width 2.362 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 15/16 in, Bore Type Cylindrical, Center Height 2 1/4 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 3,100 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6 1/4 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$102.99
You must be logged in to post a review.
Reviews
There are no reviews yet.