| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 15/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 6 7/32 in |
| Mounting Surface to Shaft Center | 2 3/16 in |
| Series | Standard Duty |
| Number of Bolts | 2 |
| Dimension H | 2 3/16 in |
| Dynamic Load Capacity | 7,900 lb |
| Dimension E | 3 3/8 in |
| Dimension H2 | 4 13/32 in |
| Dimension H1 | 13/16 in |
| Item | Pillow Block Bearing |
| Dimension J | 6 7/32 in |
| Dimension B | 2 1/32 in |
| Dimension S | 3/4 in |
| Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
| Temp. Range | -20 Degrees to 250 Degrees F |
| Dimension D | 1 15/16 in |
| Overall Length | 8.126 in |
| Static Load Capacity | 5,200 lb |
| Dimension N | 11/16 in |
| Locking Type | Set Screw |
| Dimension A | 2 3/8 in |
| Finish | Painted |
| Dimension L | 8 1/8 in |
| Overall Width | 2.375 in |
| Housing Material | Cast Iron |
| Bolt Size | 5/8 in |
| Overall Height | 4.405 in |
| Closure | Open |
| Maximum Speed | 3,050 RPM |
| Lubricant Material | NLGI #3 Equivalent |
| Inner Ring Width | 2.031 in |
| Base Height | 0.811 in |
| Seal Type | Contact |
| Base Width | 2.374 in |
| Mount Hole Center-to-Center Length | 6 7/32 in |
| System of Measurement | Inch |
| Bearing Material Grade | 52100 |
| Mounting Bolt Size | 5/8 in |
| Static Radial Load Capacity | 5,216 lbf |
| Seal Material | Nitrile Rubber |
| Minimum Temperature | -40 Degrees F |
| Bore Type | Cylindrical |
| Bore Diameter | 1 15/16 in |
| Mount Type | Bolt-Through |
| Housing Material Finish | Black Oxide |
| Maximum Temperature | 250 Degrees F |
| Mount Hole Size | 0.699 in x 0.937 in |
| Number of Mount Holes | 2 |
| Center Height | 2 3/16 in |
| Dynamic Radial Load Capacity | 7,868 lbf |
| Features | Light Duty |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-15/16" Bore, NTN, Mfr# UCPL-1.15/16M
$172.65
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.811 in, Base Width 2.374 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 15/16 in, Bore Type Cylindrical, Center Height 2 3/16 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 3,050 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6 7/32 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$172.65
You must be logged in to post a review.
Reviews
There are no reviews yet.