| Bearing Insert Type | Radial Ball |
| Bore Dia. | 13/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 1/8 in |
| Mounting Surface to Shaft Center | 1 7/16 in |
| Series | NP |
| Number of Bolts | 2 |
| Overall Height | 2.812 in |
| Overall Width | 1.5 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Housing Material | Cast Iron |
| Dimension C | 3-7/8 in to 4-3/8 in |
| Dimension D | 1 1/2 in |
| Item | Pillow Block Bearing |
| Dimension H | 2 13/16 in |
| Static Load Capacity | 1,651 lb |
| Dimension B | 5 1/2 in |
| Dimension G | 1/2 in |
| Overall Length | 5.5 in |
| Dimension A | 1 7/16 in |
| Dynamic Load Capacity | 2,801 lb |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Locking Type | Set Screw |
| Dimension F | 7/16 in |
| Dimension J | 1 3/8 in |
| Dimension L | 1 19/32 in |
| Finish | black oxide |
| Bolt Size | 3/8 in |
| Dimension E | 1 9/16 in |
| Maximum Speed | 6,350 RPM |
| Base Height | 0.5 in |
| Center Height | 1 7/16 in |
| Mount Type | Bolt-Through |
| System of Measurement | Inch |
| Bearing Material Grade | 52100 |
| Minimum Temperature | -20 Degrees F |
| Seal Material | Felt |
| Mounting Bolt Size | 3/8 in |
| Bore Type | Cylindrical |
| Self Lubricating Bearing | Yes |
| Static Radial Load Capacity | 1,651 lbf |
| Number of Mount Holes | 2 |
| Mount Hole Center-to-Center Length | 4 3/8 in |
| Bore Diameter | 13/16 in |
| Base Width | 1.5 in |
| Housing Material Finish | Black Oxide |
| Seal Type | Contact |
| Maximum Misalignment Angle | 2 Degrees |
| Lubricant Material | NGLI #2 Equivalent |
| Closure | Double Sealed |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Dynamic Radial Load Capacity | 2,801 lbf |
| Maximum Temperature | 220 Degrees F |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 13/16" Bore, SEALMASTER, Mfr# NP-13
$273,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.5 in, Base Width 1.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 13/16 in, Bore Type Cylindrical, Center Height 1 7/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Speed 6,350 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 4 3/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$273.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.