| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 3/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Pressed Steel |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 1/8 in |
| Mounting Surface to Shaft Center | 1 3/4 in |
| Series | SRP |
| Number of Bolts | 2 |
| Dimension M | 1 47/64 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Item | Pillow Block Bearing |
| Dimension G | 1/4 in |
| Dimension J | 1 5/8 in |
| Overall Height | 3.375 in |
| Dimension A | 1 3/4 in |
| Bolt Size | 3/8 in |
| Dynamic Load Capacity | 300 lb |
| Dimension B | 5 1/4 in |
| Locking Type | Set Screw |
| Dimension H | 3 3/8 in |
| Dimension C | 4 1/8 in |
| Static Load Capacity | 180 lb |
| Finish | black oxide |
| Overall Width | 1.734 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Housing Material | Steel |
| Dimension E | 2 5/16 in |
| Dimension D | 1 1/2 in |
| Overall Length | 5.25 in |
| System of Measurement | Inch |
| Bore Diameter | 1 3/16 in |
| Base Width | 1.5 in |
| Number of Mount Holes | 2 |
| Base Height | 0.218 in |
| Bore Type | Cylindrical |
| Mount Hole Center-to-Center Length | 4 1/8 in |
| Center Height | 1.75 in |
| Seal Material | Felt |
| Housing Material Finish | Black Oxide |
| Lubricant Material | NGLI #2 Equivalent |
| Self Lubricating Bearing | No |
| Static Radial Load Capacity | 2,567 lbf |
| Mounting Bolt Size | 3/4 in |
| Maximum Temperature | 220 Degrees F |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Mount Type | Bolt-Through |
| Bearing Material Grade | 52100 |
| Minimum Temperature | -20 Degrees F |
| Seal Type | Contact |
| Mount Hole Size | 7/16 in |
| Expansion Type | Fixed |
| Dynamic Radial Load Capacity | 300 lbf |
| Maximum Speed | 5,450 RPM |
| Closure | Double Sealed |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-3/16" Bore, SEALMASTER, Mfr# SRP-19
$161.98
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.218 in, Base Width 1.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 3/16 in, Bore Type Cylindrical, Center Height 1.75 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Steel, Lubricant Material NGLI #2 Equivalent, Maximum Speed 5,450 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 4 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$161.98
You must be logged in to post a review.
Reviews
There are no reviews yet.