| Bearing Insert Type | Ball |
| Bore Dia. | 1 3/8 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | 52100 Chrome Steel |
| Bolt Hole Center-to-Center | 5 11/16 in |
| Mounting Surface to Shaft Center | 2 1/8 in |
| Series | MP |
| Number of Bolts | 2 |
| Overall Length | 8 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Item | Pillow Block Bearing |
| Bolt Size | 1/2 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Static Load Capacity | 4,467 lb |
| Finish | black oxide |
| Overall Height | 4 3/16 in |
| Locking Type | Set Screw |
| Housing Material | Cast iron |
| Dynamic Load Capacity | 7,340 lb |
| Overall Width | 2 1/4 in |
| Base Height | 0.81 in |
| Lubricant Material | NGLI #2 Equivalent |
| Bearing Material Grade | 52100 |
| Closure | Double Sealed |
| Bore Diameter | 1 3/8 in |
| Center Height | 2.125 in |
| Features | Corrosion Resistant Housing, Set Screw or Eccentric Locking Collar, Wide Inner Race Bearing with Greater Load Carrying Capacity than Standard Duty |
| Dynamic Radial Load Capacity | 7,340 lbf |
| Mount Hole Center-to-Center Length | 5 33/64 in |
| Mount Type | Bolt-Through |
| Minimum Temperature | -20 Degrees F |
| Housing Material Finish | Black Oxide |
| Resistance Properties | Corrosion Resistant |
| System of Measurement | Inch |
| Number of Mount Holes | 2 |
| Bore Type | Cylindrical |
| Mounting Bolt Size | 1/2 in |
| Mount Hole Size | 9/16 in |
| Static Radial Load Capacity | 4,467 lbf |
| Maximum Temperature | 220 Degrees F |
| Base Width | 1.937 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-3/8" Bore, SEALMASTER, Mfr# MP-22
$394,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.81 in, Base Width 1.937 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 3/8 in, Bore Type Cylindrical, Center Height 2.125 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 5 33/64 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 4.187 in
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.