| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 7/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | PBT |
| Bearing Insert Material | Stainless Steel |
| Bolt Hole Center-to-Center | 127 mm |
| Mounting Surface to Shaft Center | 47.6 mm |
| Series | Corrosion Resistant with USDA-H1 Grease |
| Number of Bolts | 2 |
| Item | Pillow Block Bearing |
| Overall Height | 3.687 in |
| Dimension H | 1 7/8 in |
| Locking Type | Set Screw |
| Overall Width | 1.875 in |
| Static Load Capacity | 2,770 lb |
| Dimension G | 23/32 in |
| Dimension S | 35/64 in |
| Dimension A | 6 39/64 in |
| Bolt Size | M10 |
| Dimension C | 1 7/8 in |
| Dynamic Load Capacity | 4,950 lb |
| Dimension N | 23/32 in |
| Dimension W | 2 23/32 in |
| Dimension B | 1 11/16 in |
| Temp. Range | -4 Degrees to 230 Degrees F |
| Dimension E Min. | 4 25/32 in |
| Overall Length | 6.562 in |
| Dimension E Max. | 5 7/32 in |
| Housing Material | Polymer |
| Bearing Lubrication | Caltex FM EP or Equivalent USDA-H1 Grease |
| Finish | None |
| Inner Ring Width | 1.688 in |
| System of Measurement | Inch |
| Dynamic Radial Load Capacity | 4,945 lbf |
| Number of Mount Holes | 2 |
| Bore Diameter | 1 7/16 in |
| Mount Hole Size | 0.551 in |
| Center Height | 1 55/64 in |
| Static Radial Load Capacity | 2,765 lbf |
| Closure | Double Sealed |
| Seal Type | Contact |
| Housing Material Grade | PBT |
| Maximum Temperature | 212 Degrees F |
| Bearing Material Grade | 440C |
| Minimum Temperature | -4 Degrees F |
| Resistance Properties | Corrosion Resistant |
| Lubricant Material | FDA/USDA-H1 Solid Grease |
| Mounting Bolt Size | M10 |
| Mount Type | Bolt-Through |
| Base Height | 0.708 in |
| Bore Type | Cylindrical |
| Mount Hole Center-to-Center Length | 5 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-7/16" Bore, NTN, Mfr# SUCPPL207-23
$280,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.708 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 7/16 in, Bore Type Cylindrical, Center Height 1 55/64 in, Closure Double Sealed, Housing Material Polymer, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Temperature 212 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 5 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 3.687 in, Overall Length 6.562 in
9999 in stock
Must order in multiples of 1
Subtotal:
$280.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.