Bearing Insert Type | Radial Ball |
Bore Dia. | 1 7/16 in |
Shaft Locking Type | Eccentric Collar |
Bearing Housing Material Type | Cast Iron |
Bearing Insert Material | Alloy Steel |
Bolt Hole Center-to-Center | 5 1/8 in |
Mounting Surface to Shaft Center | 1 13/16 in |
Series | Standard Duty |
Number of Bolts | 2 |
Overall Height | 3.594 in |
Dynamic Load Capacity | 5,750 lb |
Dimension H1 | 23/32 in |
Dimension B | 2 in |
Overall Length | 6.563 in |
Overall Width | 1.874 in |
Item | Pillow Block Bearing |
Dimension H | 1 13/16 in |
Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
Finish | Painted |
Dimension D | 1 7/16 in |
Static Load Capacity | 3,450 lb |
Dimension A | 1 7/8 in |
Housing Material | Cast Iron |
Dimension J | 5 1/8 in |
Dimension L | 6 9/16 in |
Dimension N | 9/16 in |
Locking Type | Eccentric Locking Collar |
Dimension S | 47/64 in |
Bolt Size | 1/2 in |
Dimension H2 | 3 19/32 in |
Temp. Range | -20 Degrees to 250 Degrees F |
Mount Hole Center-to-Center Length | 5 1/8 in |
Mount Hole Size | 0.563 in x 0.969 in |
Dynamic Radial Load Capacity | 5,778 lbf |
Base Height | 0.72 in |
Bore Diameter | 1 7/16 in |
Bearing Material Grade | 52100 |
Features | Light Duty |
Static Radial Load Capacity | 3,440 lbf |
Seal Type | Contact |
Base Width | 1.874 in |
Housing Material Finish | Black Oxide |
Minimum Temperature | -40 Degrees F |
Mounting Bolt Size | 1/2 in |
Seal Material | Nitrile Rubber |
Closure | Open |
System of Measurement | Inch |
Maximum Temperature | 250 Degrees F |
Mount Type | Bolt-Through |
Number of Mount Holes | 2 |
Center Height | 1 51/64 in |
Lubricant Material | NLGI #3 Equivalent |
Maximum Speed | 4,200 RPM |
Bore Type | Cylindrical |
Country of Origin (subject to change) | Japan |
Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-7/16" Bore, NTN, Mfr# UELPL-1.7/16M
$109.60
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.72 in, Base Width 1.874 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 7/16 in, Bore Type Cylindrical, Center Height 1 51/64 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 4,200 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 5 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$109.60
You must be logged in to post a review.
Reviews
There are no reviews yet.