Bearing Insert Type | Ball |
Bore Dia. | 2 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Cast Iron |
Bearing Insert Material | 52100 Chrome Steel |
Bolt Hole Center-to-Center | 6 3/4 in |
Mounting Surface to Shaft Center | 2 1/2 in |
Series | MP |
Number of Bolts | 2 |
Dimension B | 9 1/2 in |
Dimension D | 2 7/8 in |
Overall Length | 9 1/2 in |
Dimension H | 5 3/32 in |
Overall Width | 2 7/8 in |
Temp. Range | -20 Degrees to 220 Degrees F |
Dimension F | 11/16 in |
Housing Material | Cast iron |
Overall Height | 5 3/32 in |
Dimension A | 2 1/2 in |
Dimension E | 1 7/16 in |
Locking Type | Set Screw |
Dimension C | 5-15/16 in to 7-9/16 in |
Item | Pillow Block Bearing |
Dimension J | 2 3/16 in |
Static Load Capacity | 6,601 lb |
Dimension G | 7/8 in |
Bolt Size | 5/8 in |
Dynamic Load Capacity | 9,752 lb |
Finish | black oxide |
Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
Dimension L | 2 23/32 in |
Housing Material Finish | Black Oxide |
Seal Material | Felt |
Closure | Double Sealed |
Bearing Material Grade | 52100 |
System of Measurement | Inch |
Base Height | 0.88 in |
Maximum Misalignment Angle | 2 Degrees |
Mounting Bolt Size | 5/8 in |
Lubricant Material | NGLI #2 Equivalent |
Static Radial Load Capacity | 6,601 lbf |
Dynamic Radial Load Capacity | 9,752 lbf |
Minimum Temperature | -20 Degrees F |
Number of Mount Holes | 2 |
Mount Hole Center-to-Center Length | 7 35/64 in |
Center Height | 2.5 in |
Mount Type | Bolt-Through |
Bore Type | Cylindrical |
Maximum Temperature | 220 Degrees F |
Bore Diameter | 2 in |
Base Width | 2.88 in |
Country of Origin (subject to change) | Multiple |
Package Quantity | 1 |
Pillow Block Bearing, Ball, 2" Bore, SEALMASTER, Mfr# MP-32
$448,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.88 in, Base Width 2.88 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 in, Bore Type Cylindrical, Center Height 2.5 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 7 35/64 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 5.093 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.