| Bearing Insert Type | Radial Ball |
| Bore Dia. | 2 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 6 1/4 in |
| Mounting Surface to Shaft Center | 2 1/4 in |
| Series | NP |
| Number of Bolts | 2 |
| Dimension E | 7/8 in |
| Dynamic Load Capacity | 7,889 lb |
| Item | Pillow Block Bearing |
| Dimension F | 11/16 in |
| Dimension G | 3/4 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Housing Material | Cast Iron |
| Overall Width | 2.375 in |
| Dimension D | 2 3/8 in |
| Dimension L | 2 19/64 in |
| Finish | black oxide |
| Locking Type | Set Screw |
| Dimension J | 2 1/32 in |
| Static Load Capacity | 5,216 lb |
| Dimension C | 5-7/16 in to 6-1/16 in |
| Dimension H | 4 9/16 in |
| Bolt Size | 5/8 in |
| Overall Length | 8.125 in |
| Dimension A | 2 1/4 in |
| Dimension B | 8 1/8 in |
| Overall Height | 4.562 in |
| Number of Mount Holes | 2 |
| Seal Type | Contact |
| Bore Diameter | 2 in |
| Seal Material | Felt |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Closure | Double Sealed |
| Bearing Material Grade | 52100 |
| Mount Hole Center-to-Center Length | 6.5 in |
| Bore Type | Cylindrical |
| Dynamic Radial Load Capacity | 7,889 lbf |
| Self Lubricating Bearing | Yes |
| Minimum Temperature | -20 Degrees F |
| Maximum Speed | 3,550 RPM |
| Center Height | 2.25 in |
| Maximum Temperature | 220 Degrees F |
| System of Measurement | Inch |
| Mounting Bolt Size | 5/8 in |
| Base Width | 2.375 in |
| Housing Material Finish | Black Oxide |
| Static Radial Load Capacity | 5,216 lbf |
| Maximum Misalignment Angle | 2 Degrees |
| Lubricant Material | NGLI #2 Equivalent |
| Mount Type | Bolt-Through |
| Base Height | 0.75 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 2" Bore, SEALMASTER, Mfr# NP-32R
$391.87
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.75 in, Base Width 2.375 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 in, Bore Type Cylindrical, Center Height 2.25 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Speed 3,550 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 6.5 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$391.87
You must be logged in to post a review.
Reviews
There are no reviews yet.