Bearing Insert Type | Radial Ball |
Bore Dia. | 2 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Cast Iron |
Bearing Insert Material | Alloy Steel |
Bolt Hole Center-to-Center | 6 23/32 in |
Mounting Surface to Shaft Center | 2 1/2 in |
Series | Medium Duty |
Number of Bolts | 2 |
Dimension E | 1 11/64 in |
Locking Type | Set Screw |
Dynamic Load Capacity | 9,780 lb |
Bolt Size | 5/8 in |
Item | Pillow Block Bearing |
Dimension A | 2 7/8 in |
Housing Material | Cast Iron |
Dimension J | 6 23/32 in |
Static Load Capacity | 6,570 lb |
Overall Height | 4.96 in |
Dimension N | 25/32 in |
Overall Width | 2.875 in |
Dimension L | 9 1/2 in |
Dimension S | 7/8 in |
Finish | Painted |
Dimension B | 2 3/16 in |
Temp. Range | -20 Degrees to 250 Degrees F |
Dimension H1 | 1 1/16 in |
Dimension H | 2 1/2 in |
Overall Length | 9.488 in |
Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
Dimension H2 | 4 31/32 in |
Seal Type | Contact |
Mount Hole Size | 0.787 in x 0.906 in |
Mount Hole Center-to-Center Length | 6 23/32 in |
Closure | Open |
Housing Material Finish | Painted |
Bore Diameter | 2 in |
System of Measurement | Inch |
Seal Material | Nitrile Rubber |
Base Height | 1.063 in |
Inner Ring Width | 2.189 in |
Static Radial Load Capacity | 6,564 lbf |
Lubricant Material | NLGI #3 Equivalent |
Mounting Bolt Size | 5/8 in |
Minimum Temperature | -40 Degrees F |
Center Height | 2.5 in |
Maximum Speed | 2,900 RPM |
Dynamic Radial Load Capacity | 9,779 lbf |
Bore Type | Cylindrical |
Features | Medium Duty |
Mount Type | Bolt-Through |
Number of Mount Holes | 2 |
Maximum Temperature | 250 Degrees F |
Bearing Material Grade | 52100 |
Base Width | 2.874 in |
Country of Origin (subject to change) | Japan |
Package Quantity | 1 |
Pillow Block Bearing, Ball, 2" Bore, NTN, Mfr# UCPX10-200D1
$134.82
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.063 in, Base Width 2.874 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 in, Bore Type Cylindrical, Center Height 2.5 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 2,900 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6 23/32 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 4.96 in
9999 in stock
Must order in multiples of 1
Subtotal:
$134.82
You must be logged in to post a review.
Reviews
There are no reviews yet.