| Bearing Insert Type | Ball |
| Bore Dia. | 2 1/2 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | 52100 Chrome Steel |
| Bolt Hole Center-to-Center | 8 in |
| Mounting Surface to Shaft Center | 3 in |
| Series | MP |
| Number of Bolts | 2 |
| Item | Pillow Block Bearing |
| Dimension G | 1 1/16 in |
| Overall Width | 3 1/4 in |
| Dimension F | 13/16 in |
| Dimension E | 1 3/4 in |
| Dimension A | 3 in |
| Dimension J | 2 3/4 in |
| Dimension B | 11 1/4 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Dimension H | 6 1/4 in |
| Overall Length | 11 1/4 in |
| Dimension L | 3 7/16 in |
| Finish | black oxide |
| Bolt Size | 3/4 in |
| Dimension D | 3 1/4 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Locking Type | Set Screw |
| Housing Material | Cast iron |
| Static Load Capacity | 10,063 lb |
| Dimension C | 7-1/8 in to 8-7/8 in |
| Overall Height | 6 1/4 in |
| Dynamic Load Capacity | 13,971 lb |
| Number of Mount Holes | 2 |
| Maximum Misalignment Angle | 2 Degrees |
| Maximum Temperature | 220 Degrees F |
| Base Width | 3.25 in |
| Bore Type | Cylindrical |
| Closure | Double Sealed |
| Bore Diameter | 2 1/2 in |
| Base Height | 1.06 in |
| Static Radial Load Capacity | 10,063 lbf |
| Mounting Bolt Size | 3/4 in |
| Lubricant Material | NGLI #2 Equivalent |
| Mount Type | Bolt-Through |
| Seal Material | Felt |
| Bearing Material Grade | 52100 |
| System of Measurement | Inch |
| Housing Material Finish | Black Oxide |
| Dynamic Radial Load Capacity | 13,971 lbf |
| Minimum Temperature | -20 Degrees F |
| Mount Hole Center-to-Center Length | 8 7/8 in |
| Center Height | 3 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 2-1/2" Bore, SEALMASTER, Mfr# MP-40
$726.52
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.06 in, Base Width 3.25 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 1/2 in, Bore Type Cylindrical, Center Height 3 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 8 7/8 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 6.25 in
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.