| Bearing Insert Type | Radial Ball |
| Bore Dia. | 2 1/4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 7 1/4 in |
| Mounting Surface to Shaft Center | 2 11/16 in |
| Series | NPL |
| Number of Bolts | 2 |
| Dimension L | 3 7/16 in |
| Dimension E | 1 in |
| Dimension C | 7-1/8 in to 8-7/8 in |
| Overall Height | 5.5 in |
| Housing Material | Cast Iron |
| Dimension G | 13/16 in |
| Dimension D | 2 3/4 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Dimension A | 2 11/16 in |
| Static Load Capacity | 8,150 lb |
| Item | Pillow Block Bearing |
| Dimension B | 9 1/2 in |
| Overall Width | 2.75 in |
| Locking Type | Set Screw |
| Dynamic Load Capacity | 11,789 lb |
| Bolt Size | 5/8 in |
| Dimension H | 5 1/2 in |
| Finish | black oxide |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Dimension J | 2 9/16 in |
| Dimension F | 11/16 in |
| Overall Length | 9.5 in |
| Seal Material | Felt |
| Maximum Temperature | 220 Degrees F |
| Mount Hole Center-to-Center Length | 7 5/8 in |
| Base Width | 2.75 in |
| Center Height | 2 11/16 in |
| System of Measurement | Inch |
| Bore Diameter | 2 1/4 in |
| Mount Type | Bolt-Through |
| Number of Mount Holes | 2 |
| Housing Material Finish | Black Oxide |
| Mounting Bolt Size | 5/8 in |
| Lubricant Material | NGLI #2 Equivalent |
| Closure | Double Sealed |
| Base Height | 0.19 in |
| Maximum Misalignment Angle | 2 Degrees |
| Minimum Temperature | -20 Degrees F |
| Bore Type | Cylindrical |
| Bearing Material Grade | 52100 |
| Static Radial Load Capacity | 8,150 lbf |
| Dynamic Radial Load Capacity | 11,789 lbf |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 2-1/4" Bore, SEALMASTER, Mfr# NPL-36
$670,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.19 in, Base Width 2.75 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 1/4 in, Bore Type Cylindrical, Center Height 2 11/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 7 5/8 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 5.5 in
9999 in stock
Must order in multiples of 1
Subtotal:
$670.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.