| Bearing Insert Type | Radial Ball |
| Bore Dia. | 3 3/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 11 1/8 in |
| Mounting Surface to Shaft Center | 4 in |
| Series | MP |
| Number of Bolts | 2 |
| Dimension F | 15/16 in |
| Dynamic Load Capacity | 18,681 lb |
| Dimension H | 8 in |
| Dimension C | 9-11/16 in to 12-9/16 in |
| Dimension B | 15 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Dimension L | 4 5/32 in |
| Bolt Size | 7/8 in |
| Housing Material | Cast Iron |
| Overall Height | 8 in |
| Dimension A | 4 in |
| Finish | black oxide |
| Dimension D | 4 in |
| Overall Width | 4 in |
| Dimension G | 1 1/4 in |
| Overall Length | 15 in |
| Dimension E | 2 5/32 in |
| Dimension J | 3 3/8 in |
| Locking Type | Set Screw |
| Item | Pillow Block Bearing |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Static Load Capacity | 14,496 lb |
| Number of Mount Holes | 2 |
| Dynamic Radial Load Capacity | 18,681 lbf |
| Seal Material | Felt |
| Bearing Material Grade | 52100 |
| Bore Diameter | 3 3/16 in |
| Lubricant Material | NGLI #2 Equivalent |
| Maximum Speed | 2,125 RPM |
| Base Width | 4 in |
| Center Height | 4 in |
| Mount Hole Center-to-Center Length | 12 9/16 in |
| Maximum Temperature | 220 Degrees F |
| Mounting Bolt Size | 7/8 in |
| System of Measurement | Inch |
| Mount Type | Bolt-Through |
| Features | Powder Coated Epoxy Cast Iron Housing with Extended Inner Ring Bearings, Sealmaster(R) Exclusive Lock Pin and Dimple for Direct Lubrication and Anti-Rotation, Land Riding Retainer Design Provides Superior Pocket Clearance that Allows for 360 Degrees Grease Circulation Around the Rolling Elements, Zone Hardened Inner Ring with 120 Degrees Spacing Setscrew Locking with Diamond Faceted Setscrews |
| Housing Material Finish | Black Oxide |
| Self Lubricating Bearing | Yes |
| Minimum Temperature | -20 Degrees F |
| Base Height | 1.25 in |
| Static Radial Load Capacity | 14,496 lbf |
| Maximum Misalignment Angle | 2 Degrees |
| Bore Type | Cylindrical |
| Seal Type | Contact |
| Closure | Double Sealed |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 3-3/16" Bore, SEALMASTER, Mfr# MP-51
$1523,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.25 in, Base Width 4 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 3 3/16 in, Bore Type Cylindrical, Center Height 4 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Speed 2,125 RPM, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 12 9/16 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$1523.99
You must be logged in to post a review.
Reviews
There are no reviews yet.