| Bearing Insert Type | Radial Ball |
| Bore Dia. | 4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 13 1/4 in |
| Mounting Surface to Shaft Center | 5 in |
| Series | MP |
| Number of Bolts | 2 |
| Item | Pillow Block Bearing |
| Dimension D | 4 3/4 in |
| Overall Height | 10 in |
| Overall Length | 17 in |
| Dimension F | 1 1/8 in |
| Finish | black oxide |
| Dynamic Load Capacity | 29,905 lb |
| Overall Width | 4.75 in |
| Dimension L | 5 11/64 in |
| Housing Material | Cast Iron |
| Dimension J | 4 5/8 in |
| Dimension A | 5 in |
| Bolt Size | 1 in |
| Dimension G | 1 5/16 in |
| Dimension E | 2 1/2 in |
| Dimension C | 11-3/4 in to 14-3/4 in |
| Static Load Capacity | 23,553 lb |
| Dimension B | 17 in |
| Dimension H | 10 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Locking Type | Set Screw |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Center Height | 5 in |
| Maximum Misalignment Angle | 2 Degrees |
| Mounting Bolt Size | 1 in |
| System of Measurement | Inch |
| Static Radial Load Capacity | 23,553 lbf |
| Mount Hole Center-to-Center Length | 14.75 in |
| Bore Type | Cylindrical |
| Minimum Temperature | -20 Degrees F |
| Bore Diameter | 4 in |
| Bearing Material Grade | 52100 |
| Dynamic Radial Load Capacity | 29,905 lbf |
| Base Width | 4.75 in |
| Mount Type | Bolt-Through |
| Seal Material | Felt |
| Lubricant Material | NGLI #2 Equivalent |
| Housing Material Finish | Black Oxide |
| Closure | Double Sealed |
| Number of Mount Holes | 2 |
| Base Height | 1.31 in |
| Maximum Temperature | 220 Degrees F |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 4" Bore, SEALMASTER, Mfr# MP-64
$2571,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.31 in, Base Width 4.75 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 4 in, Bore Type Cylindrical, Center Height 5 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 14.75 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 10 in, Overall Length 17 in
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.