| Bearing Insert Type | Radial Ball |
| Bore Dia. | 7/8 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 1/8 in |
| Mounting Surface to Shaft Center | 1 7/16 in |
| Series | NP |
| Number of Bolts | 2 |
| Dimension A | 1 7/16 in |
| Overall Height | 2.812 in |
| Finish | black oxide |
| Dimension C | 3-7/8 in to 4-3/8 in |
| Dimension E | 1 9/16 in |
| Dimension D | 1 1/2 in |
| Overall Width | 1.5 in |
| Dimension F | 7/16 in |
| Bolt Size | 3/8 in |
| Dimension G | 1/2 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Dimension L | 1 3/8 in |
| Dimension B | 5 1/2 in |
| Dimension J | 1 3/8 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Dynamic Load Capacity | 2,801 lb |
| Housing Material | Cast Iron |
| Overall Length | 5.5 in |
| Locking Type | Set Screw |
| Dimension H | 2 13/16 in |
| Item | Pillow Block Bearing |
| Static Load Capacity | 1,651 lb |
| Bearing Material Grade | 52100 |
| Mount Type | Bolt-Through |
| Maximum Temperature | 220 Degrees F |
| Seal Material | Felt |
| Maximum Misalignment Angle | 2 Degrees |
| Minimum Temperature | -20 Degrees F |
| Lubricant Material | NGLI #2 Equivalent |
| Mount Hole Center-to-Center Length | 4 3/8 in |
| Dynamic Radial Load Capacity | 2,801 lbf |
| Closure | Double Sealed |
| System of Measurement | Inch |
| Base Height | 0.5 in |
| Center Height | 1 7/16 in |
| Housing Material Finish | Black Oxide |
| Bore Diameter | 7/8 in |
| Mounting Bolt Size | 3/8 in |
| Number of Mount Holes | 2 |
| Bore Type | Cylindrical |
| Base Width | 1.5 in |
| Static Radial Load Capacity | 1,651 lbf |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 7/8" Bore, SEALMASTER, Mfr# NP-14
$130,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.5 in, Base Width 1.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 7/8 in, Bore Type Cylindrical, Center Height 1 7/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 4 3/8 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 2.812 in
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.