| Bore Dia. | 1 15/16 in |
| Temp. Range | -40 Degrees to 250 Degrees F |
| Item | Pillow Block Bearing |
| Static Load Capacity | 22,500 lb |
| Dynamic Load Capacity | 19,000 lb |
| Includes | Expansion M2000 Spherical Roller Bearing |
| Dimension D | 5 15/16 in |
| Shaft Locking Type | Set Screws |
| Dimension H | 1 3/8 in |
| Dimension A | 3 in |
| Overall Width | 3 in |
| Dimension F | 5/8 in |
| Bolt Size | 5/8 in |
| Dimension M | 2 1/4 in |
| Dimension G | 1 in |
| Bearing Insert Type | Spherical Roller |
| Overall Length | 8.375 in |
| Overall Height | 4.562 in |
| Bearing Lubrication | Lithium Complex Grease |
| Dimension N | 2 7/8 in |
| Mounting Surface to Shaft Center | 2 1/4 in |
| Dimension L | 2 7/8 in |
| Bolt Hole Center-to-Center | 6 9/16 in |
| Dimension B | 8 3/8 in |
| Number of Bolts | 2 |
| Bearing Housing Material Type | Cast Iron |
| Dimension C | 2 3/16 in |
| Dimension J | 4 9/16 in |
| Max. Speed | 2,400 RPM |
| Bearing Insert Material | Alloy Steel |
| Bore Diameter | 1 15/16 in |
| Load Direction | Thrust |
| Dynamic Axial Load Capacity | 19,000 lbf |
| Mount Hole Center-to-Center Length | 6.25 in |
| Maximum Misalignment Angle | 5.5 Degrees |
| Mounting Bolt Size | 5/8 in |
| Housing Material | Cast Iron |
| Mount Type | Bolt-Through |
| Center Height | 2.25 in |
| Base Width | 2.19 in |
| Expansion Type | Expansion |
| Minimum Temperature | -40 Degrees F |
| Base Height | 1.38 in |
| Mount Hole Size | 1 in |
| Bearing Material Grade | 52100 |
| System of Measurement | Inch |
| Number of Mount Holes | 2 |
| Features | +/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity |
| Lubricant Material | Lithium Grease |
| Application | Air Handling, Conveying, Food Processing, Paper and Forestry, Screening |
| Maximum Speed | 2,400 RPM |
| Seal Type | Contact |
| Included Bearing | Expansion M2000 Spherical Roller |
| Maximum Temperature | 250 Degrees F |
| Static Radial Load Capacity | 22,500 lbf |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block Brg, 1 15/16in Bore, Cst Iron, MOLINE BEARING, Mfr# 19121115
$346,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.38 in, Base Width 2.19 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Spherical Roller, Bore Diameter 1 15/16 in, Center Height 2.25 in, Expansion Type Expansion, Housing Material Cast Iron, Included Bearing Expansion M2000 Spherical Roller, Lubricant Material Lithium Grease, Maximum Speed 2,400 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6.25 in, Mount Type Bolt-Through
9999 in stock
Must order in multiples of 1
Subtotal:
$346.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.