Static Load Capacity
18,300 lb
Dynamic Load Capacity
16,600 lb
Includes
Expansion M2000 Spherical Roller Bearing
Temp. Range
-40 Degrees to 250 Degrees F
Mounting Surface to Shaft Center
1 7/8 in
Bearing Housing Material Type
Cast Iron
Bolt Hole Center-to-Center
5 in
Bearing Lubrication
Lithium Complex Grease
Bearing Insert Type
Spherical Roller
Shaft Locking Type
Set Screws
Bearing Insert Material
Alloy Steel
Application
Air Handling, Conveying, Food Processing, Paper and Forestry, Screening
Lubricant Material
Lithium Grease
Maximum Misalignment Angle
5.5 Degrees
Features
+/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity
System of Measurement
Inch
Minimum Temperature
-40 Degrees F
Bearing Material Grade
52100
Maximum Temperature
250 Degrees F
Mount Hole Center-to-Center Length
5 in
Housing Material
Cast Iron
Included Bearing
Expansion M2000 Spherical Roller
Dynamic Axial Load Capacity
16,600 lbf
Static Radial Load Capacity
18,300 lbf
Country of Origin (subject to change)
United States
