| Bearing Insert Type | Tapered Roller |
| Bore Dia. | 1 3/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 4 9/16 in |
| Mounting Surface to Shaft Center | 1 1/2 in |
| Number of Bolts | 2 |
| Static Load Capacity | 15,760 lb |
| Overall Width | 2.875 in |
| Dimension A | 2 3/4 in |
| Dimension B | 6 1/4 in |
| Dimension F | 1/2 in |
| Overall Length | 6.25 in |
| Dimension H | 7/8 in |
| Bolt Size | 1/2 in |
| Bearing Lubrication | Timken Lithium Complex Grease |
| Dimension M | 1 1/2 in |
| Item | Pillow Block Bearing |
| Dynamic Load Capacity | 3,810 lb |
| Overall Height | 3 in |
| Dimension D | 4 9/16 in |
| Housing Material | Cast Iron |
| Dimension L | 2 1/4 in |
| Dimension J | 3 in |
| Dimension G | 1 in |
| Temp. Range | -40 Degrees to 250 Degrees F |
| Max. Speed | 3,800 RPM |
| Includes | Timken Type E Tapered Roller Bearing |
| Dimension C | 1 7/8 in |
| Load Direction | Radial, Thrust |
| Dynamic Axial Load Capacity | 3,810 lbf |
| Application | Aggregate, Conveying, Cranes, Forestry, Mining, Oil, Gas, Power Generation, Screening |
| Seal Type | Contact |
| Bearing Material Grade | 52100 |
| Features | Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Timken (TM) Enhanced Dee Tapered Roller Bearings with the Highest Industry Load Ratings, Double-Extended Inner Race, Case Hardened Rollers and Races, Close Fit Oversized Collars Act as Flingers for Additional Protection in Dusty or Damp Environments, Dimensionally Interchangeable with Comparable Type E Units, Moline Split E1000, Moline ME2000 and ME3000, Extended Inner Race has Two Locking Collars with 65 Degrees Set Screw Spacing, Misalignment = .010 in Per Foot of Shaft, Standard V-Guard(TM) Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees |
| Included Bearing | Timken Type E Tapered Roller |
| Expansion Type | Expansion |
| Mount Type | Bolt-Through |
| Bore Type | Cylindrical |
| Number of Mount Holes | 2 |
| Bore Diameter | 1 1/4 in |
| Maximum Temperature | 250 Degrees F |
| Base Width | 1.88 in |
| Static Radial Load Capacity | 15,760 lbf |
| Lubricant Material | Lithium Complex Grease |
| Maximum Speed | 3,800 RPM |
| Center Height | 1.5 in |
| System of Measurement | Inch |
| Mounting Bolt Size | 1/2 in |
| Mount Hole Size | 1 in |
| Base Height | 0.88 in |
| Mount Hole Center-to-Center Length | 4 35/64 in |
| Minimum Temperature | -40 Degrees F |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block Brg, 1 1/4 in Bore, Cast Iron, MOLINE BEARING, Mfr# 19321104
$227,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.88 in, Base Width 1.88 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Tapered Roller, Bore Diameter 1 1/4 in, Bore Type Cylindrical, Center Height 1.5 in, Expansion Type Expansion, Housing Material Cast Iron, Included Bearing Timken Type E Tapered Roller, Lubricant Material Lithium Complex Grease, Maximum Speed 3,800 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 4 35/64 in
9999 in stock
Must order in multiples of 1
Subtotal:
$227.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.