Bearing Insert Type | Tapered Roller |
Bore Dia. | 1 7/16 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Cast Iron |
Bearing Insert Material | Alloy Steel |
Bolt Hole Center-to-Center | 5 1/2 in |
Mounting Surface to Shaft Center | 1 7/8 in |
Number of Bolts | 2 |
Dynamic Load Capacity | 6,100 lb |
Housing Material | Cast Iron |
Overall Height | 3.875 in |
Bearing Lubrication | Timken Lithium Complex Grease |
Dimension D | 5 1/2 in |
Dimension C | 2 1/8 in |
Dimension L | 2 1/2 in |
Dimension M | 1 7/8 in |
Dimension J | 3 7/8 in |
Includes | Timken Type E Tapered Roller Bearing |
Dimension H | 1 1/8 in |
Item | Pillow Block Bearing |
Overall Width | 3 in |
Dimension F | 1/2 in |
Dimension A | 3 in |
Max. Speed | 3,200 RPM |
Dimension B | 7 3/8 in |
Dimension G | 1 1/8 in |
Overall Length | 7.375 in |
Static Load Capacity | 26,000 lb |
Bolt Size | 1/2 in |
Temp. Range | -40 Degrees to 250 Degrees F |
Bore Diameter | 1 7/16 in |
Application | Aggregate, Conveying, Cranes, Forestry, Mining, Oil, Gas, Power Generation, Screening |
Dynamic Axial Load Capacity | 6,100 lbf |
Minimum Temperature | -40 Degrees F |
Number of Mount Holes | 2 |
Lubricant Material | Lithium Complex Grease |
Maximum Speed | 3,200 RPM |
Expansion Type | Expansion |
Included Bearing | Timken Type E Tapered Roller |
Mount Hole Size | 1 1/8 in |
Static Radial Load Capacity | 26,000 lbf |
Base Height | 1.13 in |
Load Direction | Radial, Thrust |
Features | Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Timken (TM) Enhanced Dee Tapered Roller Bearings with the Highest Industry Load Ratings, Double-Extended Inner Race, Case Hardened Rollers and Races, Close Fit Oversized Collars Act as Flingers for Additional Protection in Dusty or Damp Environments, Dimensionally Interchangeable with Comparable Type E Units, Moline Split E1000, Moline ME2000 and ME3000, Extended Inner Race has Two Locking Collars with 65 Degrees Set Screw Spacing, Misalignment = .010 in Per Foot of Shaft, Standard V-Guard(TM) Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees |
Maximum Temperature | 250 Degrees F |
Bearing Material Grade | 52100 |
System of Measurement | Inch |
Center Height | 1.875 in |
Mounting Bolt Size | 1/2 in |
Base Width | 2.13 in |
Mount Hole Center-to-Center Length | 5.5 in |
Bore Type | Cylindrical |
Seal Type | Contact |
Mount Type | Bolt-Through |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Pillow Block Brg, 1 7/16in Bore, Cast Iron, MOLINE BEARING, Mfr# 19321107
$260,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.13 in, Base Width 2.13 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Tapered Roller, Bore Diameter 1 7/16 in, Bore Type Cylindrical, Center Height 1.875 in, Expansion Type Expansion, Housing Material Cast Iron, Included Bearing Timken Type E Tapered Roller, Lubricant Material Lithium Complex Grease, Maximum Speed 3,200 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 5.5 in
9999 in stock
Must order in multiples of 1
Subtotal:
$260.99
You must be logged in to post a review.
Reviews
There are no reviews yet.