| Bearing Insert Type | Sleeve |
| Bore Dia. | 1/2 in |
| Shaft Locking Type | None |
| Bearing Housing Material Type | Pressed Stainless Steel |
| Bearing Insert Material | UHMW Polyethylene |
| Bolt Hole Center-to-Center | 3 in |
| Mounting Surface to Shaft Center | 1 in |
| Series | PBSS-UH |
| Number of Bolts | 2 |
| Bearing Locking Type | None |
| Dimension B | 2 in |
| Bolt Size | 3/8 in |
| Overall Height | 2 in |
| Dimension L | 1 1/8 in |
| Dimension E | 3 in |
| Finish | None |
| Dimension C | 4 in |
| Dimension F | 1/8 in |
| Overall Width | 1.125 in |
| Dimension G | 1 1/8 in |
| Max. Speed | 6,000 RPM |
| Item | Pillow Block Bearing |
| Overall Length | 4 in |
| Dimension D | 4 in |
| Includes | Solid Self-Lubricating Bearing |
| Dimension A | 1 in |
| Standards | FDA, USDA |
| Locking Type | None |
| Dimension J | 3/8 in |
| Housing Material | Stainless Steel |
| Dynamic Load Capacity | Max. PV 3000 lb |
| Temp. Range | -60 Degrees to 180 Degrees F |
| Dimension H | 1/8 in |
| Temperature Range | -60 Degrees F to 180 Degrees F |
| Base Height | 0.13 in |
| Number of Mount Holes | 2 |
| Maximum PV | 3,000 lb/sq in-fpm |
| System of Measurement | Inch |
| Mount Hole Size | 3/8 in |
| Application | Washdown |
| Bore Diameter | 1/2 in |
| Features | Ideal for Wash Down Applications in Wet or Harsh Environments or Where Sanitary Conditions are a Factor, Operating Temperature Range: -60 Degrees F to 180 Degrees F, PBSS-UH Series Bearings are USDA and FDA Approved, Two-Piece Stainless Steel Housing, UHMW-PE Bearings are Self-Lubricating, Resist Corrosion, High Impact and Abrasion |
| Maximum Temperature | 180 Degrees F |
| Center Height | 1 in |
| Mount Hole Center-to-Center Length | 3 in |
| Minimum Temperature | -60 Degrees F |
| Self Lubricating Bearing | Yes |
| Maximum Speed | 6,000 RPM |
| Mount Type | Bolt-Through |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block Bearing, Sleeve, 1/2" Bore, DAYTON, Mfr# 1F638
$37.04
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.13 in, Bearing Insert Material UHMW Polyethylene, Bearing Insert Type Sleeve, Bore Diameter 1/2 in, Center Height 1 in, Housing Material Stainless Steel, Maximum Speed 6,000 RPM, Maximum Temperature 180 Degrees F, Minimum Temperature -60 Degrees F, Mount Hole Center-to-Center Length 3 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 2 in, Overall Length 4 in, Overall Width 1.125 in, Self Lubricating Bearing Yes, Shaft Locking Type None
9999 in stock
Must order in multiples of 1
Subtotal:
$37.04
You must be logged in to post a review.
Reviews
There are no reviews yet.