Includes | Expansion M2000 Spherical Roller Bearing |
Static Load Capacity | 26,500 lb |
Bore Dia. | 2 1/4 in |
Item | Pillow Block Bearing |
Dynamic Load Capacity | 22,400 lb |
Temp. Range | -40 Degrees to 250 Degrees F |
Dimension L | 3 1/4 in |
Overall Length | 8.875 in |
Bearing Lubrication | Lithium Complex Grease |
Dimension C | 2 1/2 in |
Dimension F | 5/8 in |
Dimension J | 5 in |
Dimension H | 1 5/8 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Cast Iron |
Dimension N | 3 1/8 in |
Number of Bolts | 2 |
Bearing Insert Type | Spherical Roller |
Mounting Surface to Shaft Center | 2 1/2 in |
Bolt Size | 5/8 in |
Bolt Hole Center-to-Center | 7 1/16 in |
Overall Width | 3.25 in |
Overall Height | 5 in |
Dimension D | 6 7/16 in |
Dimension B | 8 7/8 in |
Dimension G | 1 in |
Dimension A | 3 1/4 in |
Dimension M | 2 1/2 in |
Max. Speed | 2,150 RPM |
Bearing Insert Material | Alloy Steel |
Dynamic Axial Load Capacity | 22,400 lbf |
Included Bearing | Expansion M2000 Spherical Roller |
Mount Hole Size | 1 in |
Seal Type | Contact |
Features | +/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity |
Mount Type | Bolt-Through |
Minimum Temperature | -40 Degrees F |
Bore Diameter | 2 1/4 in |
Lubricant Material | Lithium Grease |
Load Direction | Thrust |
Center Height | 2.5 in |
Mount Hole Center-to-Center Length | 6.75 in |
Maximum Temperature | 250 Degrees F |
Expansion Type | Expansion |
Bearing Material Grade | 52100 |
Base Height | 1.63 in |
Static Radial Load Capacity | 26,500 lbf |
Maximum Speed | 2,150 RPM |
Application | Air Handling, Conveying, Food Processing, Paper and Forestry, Screening |
Maximum Misalignment Angle | 5.5 Degrees |
Base Width | 2.5 in |
Housing Material | Cast Iron |
Mounting Bolt Size | 5/8 in |
Number of Mount Holes | 2 |
System of Measurement | Inch |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Pillow Block Brg, 2 1/4 in Bore, Cast Iron, MOLINE BEARING, Mfr# 19121204
$386,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.63 in, Base Width 2.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Spherical Roller, Bore Diameter 2 1/4 in, Center Height 2.5 in, Expansion Type Expansion, Housing Material Cast Iron, Included Bearing Expansion M2000 Spherical Roller, Lubricant Material Lithium Grease, Maximum Speed 2,150 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6.75 in, Mount Type Bolt-Through
9999 in stock
Must order in multiples of 1
Subtotal:
$386.99
You must be logged in to post a review.
Reviews
There are no reviews yet.