| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 1/2 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Stainless Steel |
| Bearing Insert Material | Stainless Steel |
| Bolt Hole Center-to-Center | 89 mm |
| Mounting Surface to Shaft Center | 49.2 mm |
| Series | Corrosion Resistant with USDA-H1 Grease |
| Number of Bolts | 2 |
| Finish | Chrome |
| Dimension A | 48 mm |
| Dimension J | 89 mm |
| Dimension E | 1 63/64 in |
| Locking Type | Set Screw |
| Overall Length | 4.606 in |
| Bolt Size | M12 |
| Dimension S | 19 mm |
| Dimension H | 49.2 mm |
| Item | Pillow Block Bearing |
| Dimension L | 117 mm |
| Dimension B | 1.89 mm |
| Bearing Lubrication | Caltex FM EP or Equivalent USDA-H1 Grease |
| Dimension H2 | 100 mm |
| Overall Width | 1.889 in |
| Temp. Range | -4 Degrees to 248 Degrees F |
| Dimension M | 84 mm |
| Dynamic Load Capacity | 5,120 lb |
| Housing Material | Stainless Steel |
| Dimension N | 19 mm |
| Dimension H1 | 13 mm |
| Static Load Capacity | 4,090 lb |
| Overall Height | 3.937 in |
| Dimension W | 116 mm |
| Dimension G | 20 mm |
| Lubricant Material | FDA/USDA-H1 Solid Grease |
| Base Height | 0.511 in |
| Bore Type | Cylindrical |
| Seal Material | Silicone |
| Maximum Speed | 3,300 RPM |
| Bearing Material Grade | 440C |
| Mount Type | Bolt-Through |
| Housing Material Finish | Chrome Plated |
| Base Width | 1.889 in |
| Static Radial Load Capacity | 4,092 lbf |
| Mount Hole Size | M12 |
| Closure | Double Sealed |
| Mounting Bolt Size | M12 |
| Mount Hole Center-to-Center Length | 3 1/2 in |
| Maximum Temperature | 250 Degrees F |
| System of Measurement | Inch |
| Features | Normal Duty |
| Inner Ring Width | 1.937 in |
| Dynamic Radial Load Capacity | 5,126 lbf |
| Seal Type | Contact |
| Number of Mount Holes | 2 |
| Bore Diameter | 1 1/2 in |
| Minimum Temperature | -4 Degrees F |
| Center Height | 1 59/64 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
PillowBlock Tapd Base Bearing, Ball, 1-1/2, NTN, Mfr# SUCPA208-24
$429,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.511 in, Base Width 1.889 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/2 in, Bore Type Cylindrical, Center Height 1 59/64 in, Closure Double Sealed, Housing Material Stainless Steel, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 3,300 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 3 1/2 in, Mount Type Bolt-Through
9999 in stock
Must order in multiples of 1
Subtotal:
$429.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.