| Bearing Insert Type | Radial Ball |
| Bore Dia. | 3/4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Stainless Steel |
| Bearing Insert Material | Stainless Steel |
| Bolt Hole Center-to-Center | 50.8 mm |
| Mounting Surface to Shaft Center | 33.3 mm |
| Series | Corrosion Resistant with USDA-H1 Grease |
| Number of Bolts | 2 |
| Dynamic Load Capacity | 2,270 lb |
| Bearing Lubrication | Caltex FM EP or Equivalent USDA-H1 Grease |
| Temp. Range | -4 Degrees to 248 Degrees F |
| Overall Width | 1.496 in |
| Dimension H | 33.3 mm |
| Finish | Chrome |
| Housing Material | Stainless Steel |
| Locking Type | Set Screw |
| Dimension E | 2 11/64 in |
| Item | Pillow Block Bearing |
| Dimension S | 12.7 mm |
| Dimension L | 73 mm |
| Static Load Capacity | 1,530 lb |
| Dimension H1 | 11 mm |
| Dimension J | 50.8 mm |
| Dimension H2 | 65 mm |
| Overall Length | 2.874 in |
| Overall Height | 2.559 in |
| Bolt Size | M8 |
| Dimension A | 38 mm |
| Bearing Material Grade | 440C |
| Closure | Double Sealed |
| Base Height | 0.433 in |
| Maximum Temperature | 250 Degrees F |
| Seal Material | Silicone |
| Static Radial Load Capacity | 1,529 lbf |
| Inner Ring Width | 1.22 in |
| Lubricant Material | FDA/USDA-H1 Solid Grease |
| Mounting Bolt Size | M8 |
| Mount Hole Size | M8 |
| Mount Type | Bolt-Through |
| Minimum Temperature | -4 Degrees F |
| Seal Type | Contact |
| Dynamic Radial Load Capacity | 2,271 lbf |
| Housing Material Finish | Chrome Plated |
| Number of Mount Holes | 2 |
| Bore Diameter | 3/4 in |
| Base Width | 1.496 in |
| Features | Normal Duty |
| Mount Hole Center-to-Center Length | 2 in |
| System of Measurement | Inch |
| Bore Type | Cylindrical |
| Center Height | 1 19/64 in |
| Maximum Speed | 5,900 RPM |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
PillowBlock TappedBase Bearing, Ball, 3/4, NTN, Mfr# SUCPA204-12
$143,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.433 in, Base Width 1.496 in, Bearing Insert Material Stainless Steel, Bearing Insert Type Radial Ball, Bore Diameter 3/4 in, Bore Type Cylindrical, Center Height 1 19/64 in, Closure Double Sealed, Housing Material Stainless Steel, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 5,900 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F, Mount Hole Center-to-Center Length 2 in, Mount Type Bolt-Through, Number of Mount Holes 2
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.