| Item | Electronic Pressure Sensor |
| Range | -0.2 to 3.6 psi |
| Analog Output | 4 to 20mA or 0 to 10V DC |
| Control Output | PNP |
| On/Off Setting | Programmable |
| Max. Pressure | 450 psi |
| Power Required | 18 to 30V DC |
| Process Connection | 1/4 in NPT |
| Electrical Connection | 4 Pin M12 |
| Display | 4 Digit LED |
| Operating Temp. Range | -13 Degrees to 176 Degrees F |
| IP Rating | 65/67 |
| Standards | CE, CULus |
| Housing Material | Stainless Steel |
| Wetted Materials | Stainless Steel |
| Application | for industrial applications |
| Number of analogue outputs | 1 |
| Analogue end point | 37.5...250 mbar 15...100.4 inH2O 3.75...25 kPa 385...2550 mmWS |
| Total number of outputs | 2 |
| IO-Link resolution pressure [mbar] | 0.1 |
| Transmission type | COM2 (38,4 kBaud) |
| Max. voltage drop switching output DC [V] | 2 |
| MTTF [years] | 145 |
| Output signal | switching signal, analogue signal, IO-Link, (configurable) |
| Shock resistance | DIN EN 60068-2-27 50 g (11 ms) |
| Communication interface | IO-Link |
| Integrated watchdog | yes |
| Profiles | Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000), Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis |
| Temperature coefficient zero point [% of the span / 10 K] | <± 0,2, (-0...80°C) |
| SIO mode | yes |
| Short-circuit protection | yes |
| Parameter setting options | hysteresis / window, normally open / normally closed, switch-on/switch-off delay, Damping, Display unit, current/voltage output |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Set point SP | -10.9...250 mbar -4.4...100.4 inH2O -1.09...25 kPa -112...2550 mmWS, -11...250 mbar -4.4...100.4 inH2O -1.1...25 kPa -110...2550 mmWS |
| Max. response time analogue output [ms] | 3 |
| Type of short-circuit protection | pulsed |
| Min. pressure cycles | 100 million |
| Materials | stainless steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC |
| SDCI standard | IEC 61131-9 |
| Vacuum resistance [mbar] | -1000 |
| Pressure Equipment Directive | Sound engineering practice, can be used for group 2 fluids, group 1 fluids on request |
| Protection class | III |
| Switching frequency DC [Hz] | < 500 |
| MAWP (for applications according to CRN) | 10 bar 10000 mbar 4000 inH2O 1000 kPa |
| EMC | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Response time [ms] | < 1.5 |
| Connection | Connector: 1 x M12, coding: A, Contacts: gold-plated |
| Number of inputs and outputs | Number of digital outputs: 2, Number of analogue outputs: 1 |
| Vibration resistance | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| Electrical design | PNP/NPN |
| Damping process value dAP [s] | 0...4 |
| Operating voltage [V] | 18...30 DC, (to SELV/PELV) |
| Tightening torque [Nm] | > 50, (depends on lubrication, seal and pressure rating) |
| IO-Link process data (cyclical) | function bit length pressure 16 device status 4 binary switching information 2, function bit length pressure 14 binary switching information 2 |
| Delay time programmable dS, dr [s] | 0...50 |
| Current consumption [mA] | < 35 |
| Special feature | Gold-plated contacts |
| Number of digital outputs | 2 |
| Medium temperature [°C] | -25...80 |
| Min. load resistance [?] | 2000 |
| Media | liquids and gases |
| Storage temperature [°C] | -40...100 |
| Overload protection | yes |
| Permanent current rating of switching output DC [mA] | 250 |
| IO-Link functions (acyclical) | application specific tag |
| Min. bursting pressure | 30000 mbar 12000 inH2O 3000 kPa 306000 mmWS |
| Power-on delay time [s] | 0.3 |
| Ambient temperature [°C] | -25...80 |
| Required master port type | A, (when pin 2 not connected: B) |
| Type of pressure | relative pressure |
| Materials (wetted parts) | stainless steel (1.4404 / 316L), AI2O3 (96%, ceramics), FKM |
| Reset point rP | -12...249 mbar -4.8...100 inH2O -1.2...24.9 kPa -122...2539 mmWS, -12...249 mbar -4.8...100 inH2O -1.2...24.9 kPa -120...2540 mmWS |
| Analogue start point | -12.5...200 mbar -5...80.2 inH2O -1.25...20 kPa -125...2040 mmWS |
| Switch point accuracy [% of the span] | <± 0,4, (Turn down 1:1) |
| Max. load [?] | 500 |
| Analogue current output [mA] | 4...20, (scalable 1:5) |
| IO-Link revision | 1.1 |
| Repeatability [% of the span] | <± 0,1, (with temperature fluctuations < 10 K, Turn down 1:1) |
| Reverse polarity protection | yes |
| UL approval | UL Approval no. J012 |
| Output function | normally open / normally closed, (parameterisable) |
| Min. process cycle time [ms] | 2.3, 3 |
| Damping for the analogue output dAA [s] | 0...4 |
| Hysteresis deviation [% of the span] | <± 0,1, (Turn down 1:1) |
| Measuring range | -0.0125...0.25 bar -12.5...250 mbar -5...100.4 inH2O -1.25...25 kPa -127...2549 mmWS |
| Protection | IP 65, IP 67 |
| Analogue voltage output [V] | 0...10, (scalable 1:5) |
| Temperature coefficient span [% of the span / 10 K] | <± 0,2, (-0...80°C) |
| Pressure rating | 10000 mbar 4000 inH2O 1000 kPa 102000 mmWS |
| Characteristics deviation [% of the span] | <± 0,25 (BFSL) / <± 0,5 (LS), (Turn down 1:1, BFSL = Best Fit Straight Line, LS = limit value setting) |
| Min. insulation resistance [M?] | 100, (500 V DC) |
| Min. difference between SP and rP | 1.1 mbar 0.5 inH2O 0.11 kPa 11 mmWS, 1.5 mbar 0.6 inH2O 0.15 kPa 15 mmWS |
| In steps of | 0.5 mbar 0.2 inH2O 0.05 kPa 5 mmWS, 0.1 mbar 0.1 inH2O 0.01 kPa 1 mmWS |
| Restrictor element integrated | no (can be retrofitted) |
| Long-term stability [% of the span] | <± 0,05, (Turn down 1:1, per 6 months) |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |
Pressure Sensor, Range -0.2 to 3.6 psi, IFM, Mfr# PN2298
$438.43
Free shipping will be applied on orders over $50
Electronic Pressure Sensor, Range -0.2 to 3.6 psi, Analog Output 4 to 20mA or 0 to 10V DC, Control Output PNP, Programmable On/Off Setting, Power Required 18 to 30V DC, Process Connection 1/4 in NPT, Electrical Connection 4 Pin M12, Display 4 Digit LED, Wetted Materials Stainless Steel, Housing Material Stainless Steel, Operating Temp. Range -13 Degrees to 176 Degrees F, IP Rating 65/67, Max. Pressure 450 psi, Standards CE, CULus
9999 in stock
Must order in multiples of 1
Subtotal:
$438.43
You must be logged in to post a review.
Reviews
There are no reviews yet.