Item | Pressure Plunger Pump |
Type | Belt-Drive |
Flow Capacity (GPM) | 7.9 gpm |
RPM | 1,000 RPM |
Shaft Dia. | 35 mm |
Inlet Port (In.) | 3/4 F |
Width (In.) | 18.1 in |
Discharge Port (In.) | 1/2 Degrees F |
Discharge Pressure (PSI) | 7,250 psi |
Max. Inlet Pressure (PSI) | 50 psi |
HP Required @ 2000 PSI | 10.8 hp |
HP Required @ 1000 PSI | 5.4 hp |
HP Required @ 500 PSI | 2.7 hp |
Seal | W-1 & W-2 |
Lubrication | Oil Bath |
Crankshaft | Hardened Steel |
HP Required @ 3000 PSI | 16.3 hp |
HP Required @ 5000 PSI | 27.1 hp |
HP Required @ 3500 PSI | 19 hp |
HP Required @ 2500 PSI | 13.6 hp |
HP Required @ 1500 PSI | 8.1 hp |
Pump Head | Forged Brass |
Connecting Rod | Bronze |
Crankcase | Cast Iron |
Plunger | SST |
Length (In.) | 22.7 in |
Max. Fluid Temp. (F) | 140 |
Driver Type | Electric Motor or Gasoline Engine |
Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
Height (In.) | 9.1 in |
Manifold Material | Forged Brass |
HP Required @ 4000 PSI | 21.7 hp |
Bearings | Roller |
Media Temperature (Maximum) | 140 Degrees F |
Discharge Port | 1/2 in BSP |
Operating Pressure (Maximum) | 7,520 psi |
Suction Port | 3/4 in BSP |
Overall Length | 22.7 in |
Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
Hydraulic Motor Pressure @ 500 psi | Not Applicable |
Piston Design | Triplex |
Number of Pistons | 3 |
Flow Rate (Maximum) | 7.9 gpm |
Pump Head Material | Forged Brass |
Discharge Connection Type | BSP |
Discharge Pressure (Maximum) | 7,250 psi |
Flow Rate (Minimum) | 0.79 gpm |
Shaft Type | Solid |
Flange Type | Horizontal Plunger Pump |
Crankcase Material | Cast Iron |
Plunger Material | Stainless Steel |
Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
Crankshaft Material | Hardened Steel |
Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
Seal Type | Mechanical Type 1, Mechanical Type 2 |
Connecting Rod Material | Bronze |
Required Gasoline Engine Horsepower (Maximum) | 39 3/10 hp |
Bearing Type | Roller |
Overall Width | 18.1 in |
Intake Connection Type | BSP |
Intake Connection Size | 3/4 in |
Shaft Outer Diameter | 35 mm |
Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
Overall Height | 9.1 in |
Discharge Connection Size | 1/2 in |
Drive Type | Belt-Drive |
Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
Shaft | 35 mm Solid |
Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
Required Electric Motor Horsepower (Maximum) | 27 1/10 hp |
Motor Speed (Maximum) | 1,000 RPM |
Country of Origin (subject to change) | Italy |
Package Quantity | 1 |
Pressure Washer Pump, 7.9 GPM, 3/4F x 1/2F, A.R. NORTH AMERICA, Mfr# RTP30N
$5159,99
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 1/2 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 7,250 psi, Flow Rate (Maximum) 7.9 gpm, Intake Connection Size 3/4 in, Intake Connection Type BSP, Motor Speed (Maximum) 1,000 RPM, Piston Design Triplex, Pump Head Material Forged Brass, Plunger Material Stainless Steel, Required Electric Motor Horsepower (Maximum) 27 1/10 hp, Required Gasoline Engine Horsepower (Maximum) 39 3/10 hp, Lubrication Oil Bath
9999 in stock
Must order in multiples of 1
Subtotal:
$5159.99
You must be logged in to post a review.
Reviews
There are no reviews yet.