HP Required | 1/2 hp |
Inlet | 3/4 in |
Outlet | 3/4 in |
Wetted Materials | Carbon, Ceramic, 304 SS, Viton |
Seal Material | Carbon, Ceramic, Viton |
For Use With | Clear, Non-Abrasive, Non-Flammable Liquids Compatible with Pump Components |
Type | Chemical Transfer, Straight |
GPM of Water @ 10 Ft. of Head | 34.0 |
Height | 7 13/16 in |
GPM of Water @ 20 Ft. of Head | 29 |
Impeller Material | 304 Stainless Steel |
Includes | Hardware, Mounting Adapter, O-Rings, Seal |
Port Rotation | 90 Increments |
Item | Centrifugal Pump Head |
Max. Case Pressure | 150 psi |
Use with Frame Number | 56J |
Max. Specific Gravity | 1.0 |
Impeller Type | Closed |
Housing Material | 304 Stainless Steel |
Manufacturers Warranty Length | 1 yr |
Max. Dia. Solids | 1/8 |
Max. GPM @ Head (Ft.) | 38 @ 5 |
GPM of Water @ 30 Ft. of Head | 20 |
GPM of Water @ 40 Ft. of Head | 5 |
Width | 8 3/8 in |
Length | 3 in |
Best Efficiency GPM @ Head | 28 @ 22 ft |
Inlet Pressure | 128 psi |
Shaft Material | Not Applicable |
Bearing Type | Not Applicable |
Seal Type | Mechanical Type 21 |
Motor Mounting Type | Not Applicable |
Standards | Not Applicable |
Flow Rate @ 40 ft of Head (Maximum) | 5 gpm |
Duty Cycle | Continuous |
Media Temperature (Maximum) | 200 Degrees F |
Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
Discharge Port | 3/4 in NPT |
Overall Height | 7.8 in |
Flow Rate @ 30 ft of Head (Maximum) | 20 gpm |
Horsepower (Maximum) | 1/2 hp |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 20 ft of Head (Maximum) | 29 gpm |
Suction Port | 3/4 in NPT |
Media Temperature (Minimum) | 40 Degrees F |
Viscosity (Maximum) | Not Applicable |
Discharge Pipe Size | 3/4 in |
Compatible with Brand | Dayton |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Impeller Design | Closed |
Cord Length | Not Applicable |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Feet of Head (Maximum) | 50 ft |
For Use With Potable Systems | No |
Case Pressure (Maximum) | 150 psi |
Specific Gravity (Maximum) | 1 |
Series Family | Not Applicable |
Discharge Pipe Type | NPT |
Discharge Rotation | 360 Degrees at 90 Degrees Increments |
Motor Enclosure | Not Applicable |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Shaft Outer Diameter | Not Applicable |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Best Efficiency Flow | 28 gpm |
Compatible with Pump Type | Not Applicable |
Ambient Temperature (Maximum) | 104 Degrees F |
Volute Material | 304 Stainless Steel |
Motor Speed (Maximum) | 3,450 RPM |
Product Type | Centrifugal Pump Head |
Intake Pipe Size | 3/4 in |
Overall Width | 8.3 in |
Best Efficiency Head | 22 ft |
Frequency | 60 Hz |
Compatible Motor Frame | 56J NEMA |
Nameplate Voltage | Not Applicable |
Ambient Temperature (Minimum) | 40 Degrees F |
Phase | Not Applicable |
Wetted Material | 304 Stainless Steel, Carbon, Ceramic, Viton |
Flow Rate @ 10 ft of Head (Maximum) | 34 gpm |
Intake Pipe Type | NPT |
Compatible with Manufacturer Model Number | Not Applicable |
Overall Length | 3 in |
Solid Diameter (Maximum) | 0.13 in |
Priming | Not Applicable |
Compatible with Manufacturer Part Number | Not Applicable |
Compatible Manufacturer Part Number | Not Applicable |
Compatible with Manufacturer Model Number [NEW] | Not Applicable |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump Head, 1/2 HP, 3/4 x 3/4 In., DAYTON, Mfr# 4JMY2
$371,99
Free shipping will be applied on orders over $50
Centrifugal Pump Head, Case Pressure (Maximum) 150 psi, Compatible Motor Frame 56J NEMA, Discharge Pipe Size 3/4 in, Discharge Pipe Type NPT, Discharge Rotation 360 Degrees at 90 Degrees Increments, Feet of Head (Maximum) 50 ft, Flow Rate @ 10 ft of Head (Maximum) 34 gpm, Flow Rate @ 20 ft of Head (Maximum) 29 gpm, Flow Rate @ 30 ft of Head (Maximum) 20 gpm, Flow Rate @ 50 ft of Head (Maximum) Not Applicable, Horsepower (Maximum) 1/2 hp, Housing Material 304 Stainless Steel
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.