Item | Rigid Shaft Coupling |
Shaft Locking Type - Couplings | 2 Piece Clamp |
System of Measurement | Inch |
Bore Dia. | 1/2 in x 5/8 in |
Material - Couplings | Steel |
Outside Dia. | 1 5/16 in |
Overall Length | 2 in |
With Keyway / Without Keyway | With Keyway |
Finish | black oxide |
Clearance Dia. (In.) | 1.514 |
Max. Torque | 1,600 in-lb |
Keyway Width | 3/16 in x 1/8 in |
Clearance Dia. | 1.514 in |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Design | Four Vibration Resistant Socket Capscrews |
Machined From | Bar Stock |
Screw Size (In.) | #10-32 |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Type | Two Piece Clamp Type, with Keyway |
Keyway Width (In.) | 3/16 x 1/8 |
Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
Screw Size | #10-32 |
Material | Black Oxide Steel |
Max. Torque (In.-Lbs.) | 1600 |
Screw Material | Alloy Steel |
Bore Tolerance | +0.0020 in / +0.0005 in |
Keyway Depth 1 | 3/32 in |
Maximum Operating Temperature | 350 Degrees F |
Coupling Material Grade | 1215 |
Screw Thread Size | #10-32 |
Resistance Properties | Corrosion Resistant |
Minimum Bore Diameter | 1/2 in |
Number of Locking Screws | 8 |
Bore Diameter 1 | 5/8 in |
Clearance Diameter | 1.51 in |
Coupling Outside Diameter | 1 5/16 in |
Keyway Depth 2 | 1/16 in |
Zero Backlash | Yes |
Coupling Construction | Two-Piece |
Different Bore Sizes | Yes |
Maximum Bore Diameter | 5/8 in |
Fastener Tightening Torque | 76 lb-in |
Maximum Speed | 4,000 RPM |
Bore Type | Round Keyed |
Keyway Width 2 | 1/8 in |
Coupling Material | Carbon Steel |
Shaft Locking Type | Clamp On |
Coupling Material Finish | Black Oxide |
Maximum Torque | 1,600 in-lb |
Minimum Operating Temperature | -40 Degrees F |
Screw Location from Center | 0.484 in |
Shaft Tolerance | +0.0000 in / -0.0005 in |
Bore Diameter 2 | 1/2 in |
Included Screws | (8) Clamp Screws |
Keyway Width 1 | 3/16 in |
Screw Material Finish | Black Oxide |
Recommended Gap | 0.063 in |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, Two Piece, Bore Dia 5/8 x 1/2 In, RULAND, Mfr# SPC-10-8-F
$117.36
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 5/8 in, Bore Diameter 2 1/2 in, Bore Type Round Keyed, Clearance Diameter 1.51 in, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 1 5/16 in, Different Bore Sizes Yes, Keyway Depth 1 3/32 in, Keyway Depth 2 1/16 in, Minimum Bore Diameter 1/2 in, Keyway Width 1 3/16 in, Keyway Width 2 1/8 in, Maximum Bore Diameter 5/8 in, Maximum Speed 4,000 RPM, Maximum Torque 1,600 in-lb, Overall Length 2 in
9999 in stock
Must order in multiples of 1
Subtotal:
$117.36
You must be logged in to post a review.
Reviews
There are no reviews yet.