Shaft Locking Type - Couplings
1 Piece Clamp
System of Measurement
Inch
Material - Couplings
1215 Lead Free Steel
With Keyway / Without Keyway
Without Keyway
Item - Rigid Shaft Couplings
Rigid Shaft Coupling
Standards
ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant
Max. Torque (In.-Lbs.)
18500
Clearance Dia. (In.)
3.365
Type
One Piece Clamp Type, Without Keyway
Design
Four Vibration Resistant Socket Capscrews
Application
For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque
Provides
Extra Holding Power for Higher Load Applications without Marring Shafts
Material
Black Oxide 1215 Lead Free Steel
Screw Material
Alloy Steel
Bore Tolerance
+0.0020 in / +0.0005 in
Keyway Depth 1
Not Applicable
Screw Location from Center
1.305 in
Shaft Tolerance
+0.0000 in / -0.0005 in
Keyway Width 1
Not Applicable
Screw Material Finish
Black Oxide
Coupling Material Grade
1215
Number of Locking Screws
4
Maximum Operating Temperature
350 Degrees F
Shaft Locking Type
Clamp On
Features
Precision Honed Bores, Vibration-Resistant Screws
Included Screws
(4) Clamp Screws
Coupling Construction
One-Piece
Fastener Tightening Torque
570 lb-in
Minimum Bore Diameter
1 3/4 in
Minimum Operating Temperature
-40 Degrees F
Resistance Properties
Corrosion Resistant
Clearance Diameter
3.37 in
Keyway Width 2
Not Applicable
Maximum Bore Diameter
1 3/4 in
Maximum Torque
18,500 in-lb
Coupling Outside Diameter
3 1/8 in
Coupling Material Finish
Black Oxide
Recommended Gap
Not Applicable
Coupling Material
Carbon Steel
Keyway Depth 2
Not Applicable
Country of Origin (subject to change)
United States
