Shaft Locking Type - Couplings | 2 Piece Clamp |
Item | Rigid Shaft Coupling |
System of Measurement | Metric |
Bore Dia. | 12 mm |
Material - Couplings | Stainless Steel |
Outside Dia. | 29 mm |
Overall Length | 45 mm |
With Keyway / Without Keyway | With Keyway |
Finish | Bright |
Machined From | Bar Stock |
Type | Two Piece Clamp Type, with Keyway |
Screw Size | M4 |
Clearance Dia. (mm) | 33.00 |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Design | Four Vibration Resistant Socket Capscrews |
Keyway Width | 4 mm |
Max. Torque (In.-Lbs.) | 800 |
Screw Size (mm) | M4 |
Material | Stainless Steel |
Max. Torque | 800 in-lb |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Keyway Width (mm) | 4 |
Clearance Dia. | 33.0 mm |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS3 Compliant |
Bore Tolerance | +0.050 mm / +0.012 mm |
Screw Material | Stainless Steel |
Keyway Depth 2 | 1.9 mm |
Included Screws | (8) Clamp Screws |
Minimum Bore Diameter | 12 mm |
Minimum Operating Temperature | -40 Degrees C |
Coupling Construction | Two-Piece |
Bore Type | Round Keyed |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Screw Thread Size | M4 |
Coupling Material Grade | 303 |
Bore Diameter 2 | 12 mm |
Screw Location from Center | 10.6 mm |
Maximum Bore Diameter | 12 mm |
Fastener Tightening Torque | 2.5 N-m |
Coupling Material | Stainless Steel |
Keyway Width 1 | 4 mm |
Recommended Gap | 1.6 mm |
Maximum Speed | 4,000 RPM |
Shaft Locking Type | Clamp On |
Bore Diameter 1 | 12 mm |
Maximum Operating Temperature | 176 Degrees C |
Shaft Tolerance | +0.000 mm / -0.013 mm |
Maximum Torque | 32 N-m |
Resistance Properties | Corrosion Resistant |
Screw Material Finish | Bright |
Zero Backlash | Yes |
Number of Locking Screws | 8 |
Different Bore Sizes | No |
Coupling Outside Diameter | 29 mm |
Keyway Depth 1 | 1.9 mm |
Coupling Material Finish | Bright |
Keyway Width 2 | 4 mm |
Screw Material Grade | 18-8 300 Series |
Clearance Diameter | 33 mm |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, Two Piece, Bore Dia 12 mm, RULAND, Mfr# MSPC-12-12-SS
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 12 mm, Bore Diameter 2 12 mm, Bore Type Round Keyed, Clearance Diameter 33 mm, Coupling Construction Two-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 29 mm, Different Bore Sizes No, Keyway Depth 1 1.9 mm, Keyway Depth 2 1.9 mm, Minimum Bore Diameter 12 mm, Keyway Width 1 4 mm, Keyway Width 2 4 mm, Maximum Bore Diameter 12 mm, Maximum Speed 4,000 RPM, Maximum Torque 32 N-m, Overall Length 45 mm, Shaft Locking Type Clamp On
9999 in stock
Must order in multiples of 1
Subtotal:
$126.99
You must be logged in to post a review.
Reviews
There are no reviews yet.