Shaft Locking Type - Couplings | 1 Piece Clamp |
Item | Rigid Shaft Coupling |
System of Measurement | Metric |
Bore Dia. | 25 mm |
Material - Couplings | 303 Stainless Steel |
Outside Dia. | 45 mm |
Overall Length | 75 mm |
With Keyway / Without Keyway | Without Keyway |
Finish | Bright |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Screw Size | M6 |
Max. Torque | 2,900 in-lb |
Material | 303 Stainless Steel |
Max. Torque (In.-Lbs.) | 2900 |
Machined From | Bar Stock |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Type | One Piece Clamp Type, Without Keyway |
Clearance Dia. (mm) | 51.50 |
Screw Size (mm) | M6 |
Design | Four Vibration Resistant Socket Capscrews |
Clearance Dia. | 51.5 mm |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS3 Compliant |
Bore Tolerance | +0.050 mm / +0.012 mm |
Screw Material | Stainless Steel |
Keyway Width 1 | Not Applicable |
Screw Location from Center | 16.9 mm |
Coupling Construction | One-Piece |
Included Screws | (4) Clamp Screws |
Bore Type | Round |
Different Bore Sizes | No |
Keyway Width 2 | Not Applicable |
Zero Backlash | Yes |
Screw Material Finish | Bright |
Coupling Material Grade | 303 |
Coupling Material Finish | Bright |
Coupling Material | Stainless Steel |
Maximum Operating Temperature | 176 Degrees C |
Minimum Operating Temperature | -40 Degrees C |
Clearance Diameter | 51.5 mm |
Number of Locking Screws | 4 |
Bore Diameter 2 | 25 mm |
Screw Material Grade | 18-8 300 Series |
Shaft Locking Type | Clamp On |
Fastener Tightening Torque | 9.6 N-m |
Recommended Gap | Not Applicable |
Bore Diameter 1 | 25 mm |
Shaft Tolerance | +0.000 mm / -0.013 mm |
Coupling Outside Diameter | 45 mm |
Resistance Properties | Corrosion Resistant |
Minimum Bore Diameter | 25 mm |
Maximum Bore Diameter | 25 mm |
Maximum Speed | 4,000 RPM |
Keyway Depth 2 | Not Applicable |
Screw Thread Size | M6 |
Maximum Torque | 120 N-m |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Keyway Depth 1 | Not Applicable |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, One Piece, Bore Dia 25 mm, RULAND, Mfr# MCLX-25-25-SS
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 25 mm, Bore Diameter 2 25 mm, Bore Type Round, Clearance Diameter 51.5 mm, Coupling Construction One-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 45 mm, Different Bore Sizes No, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 25 mm, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 25 mm, Maximum Speed 4,000 RPM, Maximum Torque 120 N-m, Overall Length 75 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$152.99
You must be logged in to post a review.
Reviews
There are no reviews yet.