| Screw Material | Alloy Steel |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Screw Seating Torque | 16 N-m |
| Bore Tolerance | +0.0020/+0.0005 in |
| System of Measurement | Metric with Inch Bore |
| Width Tolerance | +0.076/-0.254 mm |
| Item | Mountable Shaft Collar |
| Keyway Width | Not Applicable |
| Resistance Properties | Corrosion Resistant |
| Inside Height to Flat | Not Applicable |
| Collar Outside Diameter | 60 mm |
| Shaft Locking Type | Clamp On |
| Bore Diameter | 1 1/2 in |
| Collar Material Finish | Black Oxide |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Collar Width | 15 mm |
| Minimum Operating Temperature | -40 Degrees C |
| Collar Material | Carbon Steel |
| Keyway Depth | Not Applicable |
| Clearance Diameter | 65.6 mm |
| Screw Thread Size | M6 |
| Included Screws | Clamp Screw |
| For Shaft Diameter | 1 1/2 in |
| Bore Type | Round |
| Bore Thread Size | Not Applicable |
| Screw Material Finish | Black Oxide |
| Collar Material Grade | 1215 |
| Mount Hole Size | 6.35 mm |
| Maximum Operating Temperature | 176 Degrees C |
| Component Mount Type | Face Mount Holes |
| Collar Construction | 1-Piece |
| Screw Location from Center | 24.99 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-24E-F
$18,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 1 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 60 mm, Inside Height to Flat Not Applicable, Clearance Diameter 65.6 mm, Collar Width 15 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$18.99
You must be logged in to post a review.
Reviews
There are no reviews yet.