| Screw Material | Alloy Steel |
| Width Tolerance | +0.076/-0.254 mm |
| System of Measurement | Metric with Inch Bore |
| Item | Mountable Shaft Collar |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Bore Tolerance | +0.0020/+0.0005 in |
| Screw Seating Torque | 39 N-m |
| Minimum Operating Temperature | -40 Degrees C |
| Resistance Properties | Corrosion Resistant |
| Included Screws | Clamp Screw |
| Screw Thread Size | M8 |
| Bore Diameter | 1 3/4 in |
| Inside Height to Flat | Not Applicable |
| Bore Type | Round |
| Collar Construction | 1-Piece |
| Mount Hole Size | 8.73 mm |
| Collar Material Grade | 1215 |
| Keyway Width | Not Applicable |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Maximum Operating Temperature | 176 Degrees C |
| Bore Thread Size | Not Applicable |
| Collar Outside Diameter | 73 mm |
| For Shaft Diameter | 1 3/4 in |
| Collar Material Finish | Black Oxide |
| Shaft Locking Type | Clamp On |
| Collar Width | 19 mm |
| Screw Location from Center | 29.49 mm |
| Screw Material Finish | Black Oxide |
| Clearance Diameter | 80.1 mm |
| Keyway Depth | Not Applicable |
| Component Mount Type | Face Mount Holes |
| Collar Material | Carbon Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-28E-F
$34,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 1 3/4 in, Bore Thread Size Not Applicable, Collar Outside Diameter 73 mm, Inside Height to Flat Not Applicable, Clearance Diameter 80.1 mm, Collar Width 19 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$34.99
You must be logged in to post a review.
Reviews
There are no reviews yet.