Screw Material | Stainless Steel |
Bore Tolerance | +0.050/+0.012 mm |
Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
System of Measurement | Metric |
Width Tolerance | +0.076/-0.254 mm |
Screw Seating Torque | 9.6 N-m |
Item | Mountable Shaft Collar |
Resistance Properties | Corrosion Resistant |
Bore Thread Size | Not Applicable |
Minimum Operating Temperature | -40 Degrees C |
Collar Material | Stainless Steel |
Keyway Depth | Not Applicable |
Collar Outside Diameter | 54 mm |
Included Screws | Clamp Screw |
Screw Location from Center | 21.49 mm |
Shaft Locking Type | Clamp On |
Screw Thread Size | M6x18 |
Clearance Diameter | 59.2 mm |
Keyway Width | Not Applicable |
Component Mount Type | Face Mount Holes |
Collar Material Finish | Bright |
Collar Construction | 1-Piece |
Shaft Tolerance | +0.000/-0.013 mm |
Collar Width | 15 mm |
Screw Length | 18 mm |
Mount Hole Size | 6.35 mm |
Inside Height to Flat | Not Applicable |
Bore Type | Round |
Bore Diameter | 30 mm |
Screw Material Grade | 18-8 300 Series |
Screw Material Finish | Bright |
For Shaft Diameter | 30 mm |
Collar Material Grade | 303 |
Maximum Operating Temperature | 176 Degrees C |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-30-SS
$34,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric, Bore Type Round, Bore Diameter 30 mm, Bore Thread Size Not Applicable, Collar Outside Diameter 54 mm, Inside Height to Flat Not Applicable, Clearance Diameter 59.2 mm, Collar Width 15 mm, Collar Material Stainless Steel, Keyway Width Not Applicable, Collar Material Grade 303, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Stainless Steel, Screw Material Finish Bright, Resistance Properties Corrosion Resistant
9999 in stock
Must order in multiples of 1
Subtotal:
$34.99
You must be logged in to post a review.
Reviews
There are no reviews yet.