| Screw Material | Alloy Steel |
| Bore Tolerance | +0.0020/+0.0005 in |
| Item | Mountable Shaft Collar |
| Width Tolerance | +0.076/-0.254 mm |
| System of Measurement | Metric with Inch Bore |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Screw Seating Torque | 39 N-m |
| Keyway Depth | Not Applicable |
| Collar Outside Diameter | 82 mm |
| Resistance Properties | Corrosion Resistant |
| Collar Material | Carbon Steel |
| Screw Thread Size | M8 |
| Component Mount Type | Face Mount Holes |
| Screw Location from Center | 34.24 mm |
| Included Screws | Clamp Screw |
| Screw Material Finish | Black Oxide |
| Shaft Locking Type | Clamp On |
| Bore Thread Size | Not Applicable |
| Collar Material Finish | Black Oxide |
| Clearance Diameter | 88.8 mm |
| Minimum Operating Temperature | -40 Degrees C |
| Collar Material Grade | 1215 |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Collar Construction | 1-Piece |
| Bore Type | Round |
| Keyway Width | Not Applicable |
| Inside Height to Flat | Not Applicable |
| For Shaft Diameter | 2 in |
| Mount Hole Size | 8.73 mm |
| Bore Diameter | 2 in |
| Maximum Operating Temperature | 176 Degrees C |
| Collar Width | 19 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-32E-F
$42,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 82 mm, Inside Height to Flat Not Applicable, Clearance Diameter 88.8 mm, Collar Width 19 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$42.99
You must be logged in to post a review.
Reviews
There are no reviews yet.