| Screw Material | Alloy Steel |
| Bore Tolerance | +0.0020/+0.0005 in |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Screw Seating Torque | 2.1 N-m |
| Width Tolerance | +0.076/-0.254 mm |
| System of Measurement | Metric with Inch Bore |
| Item | Mountable Shaft Collar |
| Resistance Properties | Corrosion Resistant |
| Collar Material | Carbon Steel |
| Bore Diameter | 3/8 in |
| Bore Type | Round |
| For Shaft Diameter | 3/8 in |
| Clearance Diameter | 26.3 mm |
| Keyway Width | Not Applicable |
| Minimum Operating Temperature | -40 Degrees C |
| Screw Thread Size | M3 |
| Collar Material Finish | Black Oxide |
| Collar Width | 9 mm |
| Included Screws | Clamp Screw |
| Collar Outside Diameter | 24 mm |
| Inside Height to Flat | Not Applicable |
| Bore Thread Size | Not Applicable |
| Component Mount Type | Face Mount Holes |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Collar Material Grade | 1215 |
| Shaft Locking Type | Clamp On |
| Screw Location from Center | 8.51 mm |
| Collar Construction | 1-Piece |
| Screw Material Finish | Black Oxide |
| Keyway Depth | Not Applicable |
| Mount Hole Size | 3.26 mm |
| Maximum Operating Temperature | 176 Degrees C |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-6E-F
$8,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 3/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 24 mm, Inside Height to Flat Not Applicable, Clearance Diameter 26.3 mm, Collar Width 9 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$8.99
You must be logged in to post a review.
Reviews
There are no reviews yet.