| Screw Material | Alloy Steel |
| System of Measurement | Metric with Inch Bore |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015 Certified, REACH Compliant, RoHS3 Compliant |
| Bore Tolerance | +0.0020/+0.0005 in |
| Screw Seating Torque | 4.6 N-m |
| Width Tolerance | +0.076/-0.254 mm |
| Item | Mountable Shaft Collar |
| Collar Material | Carbon Steel |
| Collar Construction | 1-Piece |
| Screw Location from Center | 11 mm |
| Bore Thread Size | Not Applicable |
| Keyway Depth | Not Applicable |
| Collar Outside Diameter | 30 mm |
| Included Screws | Clamp Screw |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Minimum Operating Temperature | -40 Degrees C |
| Collar Material Grade | 1215 |
| Clearance Diameter | 33.7 mm |
| Screw Thread Size | M4 |
| Collar Width | 11 mm |
| Bore Type | Round |
| Keyway Width | Not Applicable |
| For Shaft Diameter | 1/2 in |
| Component Mount Type | Face Mount Holes |
| Maximum Operating Temperature | 176 Degrees C |
| Bore Diameter | 1/2 in |
| Mount Hole Size | 4.31 mm |
| Shaft Locking Type | Clamp On |
| Collar Material Finish | Black Oxide |
| Resistance Properties | Corrosion Resistant |
| Inside Height to Flat | Not Applicable |
| Screw Material Finish | Black Oxide |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
SHAFT COLLAR MOUNTABLE, RULAND, Mfr# FHD-MCL-8E-F
$8,99
Free shipping will be applied on orders over $50
Mountable Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 30 mm, Inside Height to Flat Not Applicable, Clearance Diameter 33.7 mm, Collar Width 11 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide
9999 in stock
Must order in multiples of 1
Subtotal:
$8.99
You must be logged in to post a review.
Reviews
There are no reviews yet.