| Bore Dia. | 1/2 in |
| Material | 303 Stainless Steel |
| Number of Pieces | 2 |
| Collar Style | Clamp, D-Bore |
| Outside Dia. | 1 1/8 in |
| Dimension Type | Inch |
| Width | 13/32 in |
| Screw Size | #8-32 |
| Operating Temp. Range | -40 Degrees to 350 Degrees F |
| Clearance Dia. | 1.281 in |
| Screw Material | Stainless Steel |
| Material - Collars | 303 Stainless Steel |
| System of Measurement | Inch |
| Bore Type - Collars | D-Bore |
| Item - Shaft Collars | Shaft Collar |
| Item | Shaft Collar |
| Shaft Locking Type - Couplings | 2 Piece Clamp |
| Standards | ANSI, Conflict Minerals Compliant, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Width Tolerance | +0.003/-0.010 in |
| Distance Across Flats | Not Applicable |
| Screw Seating Torque | 28 lb-in |
| Bore Tolerance | +0.002/+0.0005 in |
| Bore Width | Not Applicable |
| Maximum Operating Temperature | 350 Degrees F |
| Handle Material | Not Applicable |
| Resistance Properties | Corrosion Resistant |
| Collar Material Finish | Bright |
| Collar Material Grade | 303 |
| Keyway Depth | Not Applicable |
| Thread Direction | Not Applicable |
| Bore Diameter | 1/2 in |
| Collar Construction | 2-Piece |
| Mount Hole Thread Size | Not Applicable |
| Screw Material Grade | 304 |
| Screw Thread Size | #8-32 |
| For Shaft Diameter | 1/2 in |
| Flat to Bore | Not Applicable |
| Minimum Operating Temperature | -40 Degrees F |
| Screw Material Finish | Bright |
| Clearance Diameter | 1.28 in |
| Keyway Width | Not Applicable |
| Shaft Locking Type | Clamp On |
| Lever Part Number | Not Applicable |
| Included Screws | (2) Hex Socket Cap Screw |
| Center to Lever Top | Not Applicable |
| Collar Width | 13/32 in |
| Handle Material Finish | Not Applicable |
| Component Mount Type | Not Applicable |
| Screw Location from Center | 0.41 in |
| Bore Type | D |
| Lever Length | Not Applicable |
| Handle Color | Not Applicable |
| Bore Thread Size | Not Applicable |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Lever Height | Not Applicable |
| Inside Height to Flat | 0.47 in |
| Collar Outside Diameter | 1 1/8 in |
| Collar Material | Stainless Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Shaft Collar, D-Bore, 2Pc, 1/2 In, 303 SS, RULAND, Mfr# SPD-8-SS
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Shaft Collar, System of Measurement Inch, Bore Type D, Bore Diameter 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 1/8 in, Inside Height to Flat 0.47 in, Clearance Diameter 1.28 in, Collar Width 13/32 in, Collar Material Stainless Steel, Keyway Width Not Applicable, Collar Material Grade 303, Keyway Depth Not Applicable, Thread Direction Not Applicable, Center to Lever Top Not Applicable, Collar Construction 2-Piece, Screw Material Stainless Steel
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.