Item | Rotary Shaft Seal |
Seal Type | Single Lip Seal |
Inside Dia. | 5/8 in |
Outside Dia. | 1 in |
Width | 3/16 in |
Lip Material | Nitrile Rubber |
Design Code | SB |
Max. Pressure | 7 psi |
Standards | DIN 3760 |
Overall Width | 0.187 in |
Spring Type | Garter |
Case Coating | None |
Maximum Temperature | 250 Degrees F |
For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
Outside Diameter | 1 in |
System of Measurement | Inch |
Hardness | 45 HRC @ 4 m/s and 55 HRC @ 10 m/s |
Maximum Surface Speed | 999 mps |
Seal Design | SB |
Inside Diameter | 0.625 in |
Spring Reinforcement | Yes |
Contact Type | Contact Seal |
Lip Material Application | Nitrile Rubber for General Applications |
Minimum Temperature | -40 Degrees F |
Number of Lips | 1 |
Maximum Pressure | 7 psi |
Country of Origin (subject to change) | Multiple |
Package Quantity | 1 |
Shaft Seal, SB, 0.625in ID, Nitrile Rubber, DDS, Mfr# IN15.8725.44.76SB
$5,95
Free shipping will be applied on orders over $50
Rotary Shaft Seal, Design Code SB, Inside Diameter 0.625 in, Outside Diameter 1 in, Overall Width 0.187 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Inch, Case Coating None
9999 in stock
Must order in multiples of 2
Subtotal:
$11.9
You must be logged in to post a review.
Reviews
There are no reviews yet.