| Item | Rotary Shaft Seal |
| Seal Type | Single Lip Seal |
| Inside Dia. | 31.75 mm |
| Outside Dia. | 50.8 mm |
| Width | 12.7 mm |
| Lip Material | Nitrile Rubber |
| Design Code | SC |
| Max. Pressure | 7 psi |
| Standards | DIN 3760 |
| Lip Material Application | Nitrile Rubber for General Applications |
| Overall Width | 0.5 in |
| Maximum Temperature | 250 Degrees F |
| System of Measurement | Inch |
| Spring Type | Garter |
| Seal Design | SC |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 m/s and 55 HRC @ 10 m/s |
| Spring Reinforcement | Yes |
| Case Coating | None |
| Number of Lips | 1 |
| Minimum Temperature | -40 Degrees F |
| Outside Diameter | 2 in |
| Maximum Pressure | 7 psi |
| Inside Diameter | 1.125 in |
| Contact Type | Contact Seal |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Shaft Seal, SC, 1.125in ID, Nitrile Rubber, DDS, Mfr# 31.7550.812.7SC
$7,55
Free shipping will be applied on orders over $50
Rotary Shaft Seal, Design Code SC, Inside Diameter 1.125 in, Outside Diameter 2 in, Overall Width 0.5 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Inch, Case Coating None
9999 in stock
Must order in multiples of 2
Subtotal:
$15.1
You must be logged in to post a review.
Reviews
There are no reviews yet.