Item | Rotary Shaft Seal |
Seal Type | Lip Seal |
Inside Dia. | 75 mm |
Outside Dia. | 95 mm |
Width | 8 mm |
Lip Material | Nitrile Rubber |
Design Code | TC |
Max. Pressure | 7 psi |
Overall Width | 8 mm |
Lip Material Application | Nitrile Rubber for General Applications |
Hardness | 45 HRC @ 4 m/s and 55 HRC @ 10 m/s |
Spring Type | Garter |
Spring Reinforcement | Yes |
Case Coating | None |
System of Measurement | Metric |
Maximum Temperature | 250 Degrees F |
Maximum Pressure | 7 psi |
For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
Contact Type | Contact Seal |
Minimum Temperature | -40 Degrees F |
Number of Lips | 2 |
Outside Diameter | 95 mm |
Seal Design | TC |
Standards | DIN 3760 |
Inside Diameter | 75 mm |
Maximum Surface Speed | 999 mps |
Country of Origin (subject to change) | Multiple |
Package Quantity | 1 |
Shaft Seal, 75 x 95 x 8 mm., TC, Nitrile Rubber, DDS, Mfr# 75958TC
$17,95
Free shipping will be applied on orders over $50
Rotary Shaft Seal, Design Code TC, Inside Diameter 75 mm, Outside Diameter 95 mm, Overall Width 8 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 2, System of Measurement Metric, Case Coating None
9999 in stock
Must order in multiples of 1
Subtotal:
$17.95
You must be logged in to post a review.
Reviews
There are no reviews yet.