| Item | Spiral Flute Tap |
| Tap Thread Size | M10-1.50 |
| Overall Length | 102.00mm |
| Tap Chamfer | Plug |
| Tap Style | Spiral Flute |
| Tap Thread Type | Metric |
| Tap Size | M10 |
| Shank Dia. | 10.00mm |
| Number of Flutes | 2 |
| Tap Dimension Type | Metric |
| Tap Finish | CrN |
| Tap Material | High Speed Steel |
| Measurement System | Metric |
| Thread Direction | Right Hand |
| Thread Length | 15.00mm |
| List Number | S2051604 |
| Pitch Diameter Limit | 6H |
| Standards | DIN 371 |
| Number of Pieces | 1 |
| Cutting Direction - Machining | Right Hand |
| Series | Paradur WLM Synchrospeed |
| Primary Material Application | Aluminum, Brass, Bronze, Composite, Copper, Nickel, Titanium |
| Drill Bit Size | 8.50mm |
| Helix Angle | 45 Degrees |
| Square Size | 8.00mm |
| Secondary Material Application | Steel |
| Secondary Material Application ISO Code | P |
| Thread Pitch | 1.50mm |
| Extended Neck | Yes |
| Coolant Fed | Non-Coolant Through |
| 75% Thread Drill Size | 8.50mm |
| Shank Type - Machining | Weldon Flat |
| 65% Thread Drill Size | 11/32 in |
| 55% Thread Drill Size | 8.90 mm |
| Thread Limit | D4, D5 |
| Thread Standard | Metric Coarse |
| Spiral Direction | Right Hand |
| Thread Size | M10x1.5 |
| Material Grade - Machining | CRN |
| Primary Material Application ISO Code | N, O, S |
| Tap Shank Standard | DIN 371 |
| Shank Length | 61.00 mm |
| Thread Limit / Class of Fit | D4, D5 |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |
Spiral Flute Tap, M10-1.50, Plug, 2 Flutes, Metric, WALTER PROTOTYP, Mfr# S2051604-M10
$76,99
Free shipping will be applied on orders over $50
Spiral Flute Tap, Thread Size M10x1.5, Metric Coarse, Overall Length 100.00 mm, High Speed Steel, CRN, Thread Length 15.00 mm, 75 Percent Thread Drill Size 8.50mm, Thread Limit D4, D5, Thread Direction Right Hand, Number of Flutes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$76.99
You must be logged in to post a review.
Reviews
There are no reviews yet.