| Type | Tank |
| Drum Capacity | Generic |
| Tank Depth | 122 in |
| Connection Size | 1.5 in NPT |
| Calibration Unit Increments | 1/8s of a tank |
| Pressure Rating | 70 psi |
| Bushing Material | Aluminum |
| Rivet Material | Brass |
| Gasket Material | Duro Nitrile |
| Manufacturers Warranty Length | 1 yr |
| Float Material | HDPE |
| Special Features | Generic Capacity |
| Resolution | 1/8 of a Tank |
| Temp. Range | -20 Degrees to 120 Degrees F |
| Item | Level Gauge |
| Calibration Unit Material | Plastic |
| Extension Length | 0 in |
| Accuracy | 1/8 of a Tank |
| Rod Material | Galvanized Steel |
| Assembly Nut Material | HDPE |
| Float Dia. | 1 1/8 in |
| Maximum Temperature | 120 Degrees F |
| For Container Capacity | No Exact Capacity |
| Units of Measurement | Inches |
| Float Rod Material | Galvanized Steel |
| Maximum Operating Pressure | 70 psi |
| Increment of Variation | Primary 1/4, Secondary 1/8 |
| For Liquid Type | Diesel, Gasoline, Hydraulic Oil |
| Pipe Size | 1 1/2 in |
| For Container Type | No Specific Style |
| For Container Depth | 122 in |
| Housing Material | Cellulose Acetate |
| Graduation Marks | Empty, Full, 1/8 Increments |
| Seal Material | Nitrile Rubber |
| Thread Type | NPT |
| Float Diameter | 1 1/8 in |
| Features | Can Accommodate Pipe Risers, Vaulted and Double Wall Tanks, Cost Effective Durable Design |
| Thread Gender | Male |
| Window Material | Cellulose Acetate |
| Standards | FL Approved |
| Manufacturer Warranty Length | 1 yr |
| Minimum Temperature | -20 Degrees F |
| Rod/Float Material | Galvanized Steel / HDPE |
| Container Compatibility | Any with Compatible Depth |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Therma Level Gauge, Tank 122"D, 1.5"NPT, KRUEGER, Mfr# H-1.5-122
$121,99
Free shipping will be applied on orders over $50
Level Gauge, Extension Length 0 in, Float Material HDPE, For Container Capacity No Exact Capacity, For Container Depth 122 in, For Container Type No Specific Style, For Liquid Type Diesel, Gasoline, Hydraulic Oil, Graduation Marks Empty; Full; 1/8 Increments, Increment of Variation Primary 1/4, Secondary 1/8, Pipe Size 1 1/2 in, Accuracy 1/8 of a Tank, Assembly Nut Material HDPE, Bushing Material Aluminum
9999 in stock
Must order in multiples of 1
Subtotal:
$121.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.