Standards
EN/IEC 61800-3, EN/IEC 61800-5-1, IEC 60721-3, IEC 61508, IEC 13849-1, UL 508C, UL 61800-5-1, CSA C22.2 No 274
Control Type
Keypad, Remote, Terminal, Network
Start/Stop Control
Programmable
Displays
Set Frequency, Motor Frequency, Hertz, RPM, Custom Units, Motor Current, Motor Voltage, Bus Voltage, Speed, Alarms and Programmable
With Line Contactor / No Line Contactor
No Line Contactor
With Bypass / No Bypass
No Bypass
Adjustable Deceleration Time
0 to 6,000 sec
Digital Readout
Set Frequency, Motor Frequency, Hertz, RPM, Custom Units, Motor Current, Motor Voltage, Bus Voltage, Speed, Alarms and Programmable
Control Method
Keypad, Remote, Terminal, Network
Protection
Input phase breaks: drive, Overcurrent between output phases and earth: drive, Overheating protection: drive, Short-circuit between motor phases: drive, Thermal protection: drive
Adjustable Acceleration Time
0 to 6,000 sec
Output Frequency Range
0.1 to 599 Hz
Accepts Input Control Signal
0 to 10V DC, 0 to 20mA Adjustable, Bipolar -10 to 10V DC
For Use With
three-phase Asynchronous, Synchronous Motors
Number of Inputs
(3) Analog; (7) Discrete
Input Type
Analog, Discrete
Torque Application
Constant Torque, Variable Torque
Maximum Output Current
1.7 A
Application
Complex machines
Output Voltage Range
525V AC to 600V AC
Input Voltage Range
460 to 660V AC
Output Type
Analog, Discrete
Number of Outputs
(1) Analog; (3) Discrete
Brake Chopper Included
Yes
Country of Origin (subject to change)
Indonesia
